BauerT-Handle Lock, Complete Set of Two (One Clockwise and One Counterclockwise) | Keyed K127

They were very easy to install. The only thing I advise is that I did need to drill the center holes bigger than the stock locks had. Besides that, it was very easy to replace the OEM locks. Keys work great and the product looks good. Definitely worth the money

I had been looking for some new handles for My canopy ( Truck cap/ Topper ) as my old handles were starting to have issues ( One broke off the center mount bracket and the other was seizing up due to old age and weather). In my search for new handles I look at some of the specialty shops that cater to those with a truck canopy ( or topper/shell ) and of course various retail outlets and online as well.In my search it was a little tough to find everything all together as compared to what is in the Bauer Matching T-Handle Lock Set kit this review is on. I had seen where you could get the whole kit ( some were Bauer kit's and some were not) Some of locking T-Handle's were just being sold as a single handle with the accessories with it ( I was looking for both handles, so basically a set of two with all the accessories ) In my search at some of the specialty stores I did see a few kits, but the kit was ridiculously expensive compared to the Bauer T-Handles Lock Set of two I bought here at Amazon... even with the shipping charges included, it was still cheaper by over 60%.At some of the specialty shops, to buy the kit was well over the cost of the Bauer T-Handle Locking Set here at Amazon. Some of the specialty shops also won't sell everything in a kit. I encountered this at some shops where everything is sold separately and once everything was added it up I found it to be quite pricey and more than what I was willing to pay ( I didn't wan't to buy their company, I just wanted some new handles )In my search for new handles I checked some of the auto parts places and of course the hardware stores, and once again I encountered not being able to find the two in a set like here at Amazon. Lots of handles and the assorted parts sold separately and some where it was 1 handle with accessories per set which still turned out to be pricey.I found online some places and vendors that sold different make Locking T-Handle but they wouldn't fit my truck Canopy ( topper/shell ) that were sold one in a set and two in a set. Further online searches started to become fruitless and when I did find some that were two to set with all the accessories the vendor didn't ship outside of the U.S. ( this happened a lot, so it was a little bit of a test in perseverance to find a good value and someone that shipped to Canada and at a good price)After much searching over a number of days, I fount the Bauer T-Handle Locking Set here at a vendor on Amazon. The Bauer Matching T-Handle Set included two handles and all the accessories ( I didn't wan't to leave the one handle that was starting to seize on the canopy, better to change it now then when I can't open it on one side due to it seizing completely )The Bauer set that I bought here at Amazon met the bill on a number of points. It included two handles on a nice long shaft, two keys per handle ( 4 keys total), two hard composite plastic gaskets , two long steel catches, two handle covers and four screws for mounting. The great thing about this set is matching keys for both locks! No having to have to fumble for two different keys, and trying to guess which key opens which handle.One of the nice thing about the Bauer Locking T-Handle set is that these handles are made out of steel , not a composite plastic which means they will be a lot more durable then the plastic ones. ( The old steel set on my truck have been on there for 12 years! ) Installation of the handles took about 10 minutes.The Bauer Locking T-Handle set is well built. The handles are very sturdy with no play in them. The steel catches that are included in this set are even longer by a about a 1/2 inch compared to my old one which means that they are deeper in over the side of your canopy ( Topper/Shell ) so they will help prevent someone from pulling your handle to one side and being able to wiggle the catch out and open one side of your canopy ( Topper /Shell ) and gain access to the inside.Once nice little surprise with this set is that Bauer has put loctite on the threads of the screws that hold the handles on ( I was ready to go and purchase some... but didn't have to since Bauer provided it... a subtle but nice touch to help keep you handles in place snugly. The long steel shaft on the handles and the set screw on the catch leaves you ample room to make sure your able to have enough length to adjust where you need the catch to be to secure your canopy ( Topper /Shell ).The only down side I can see to the set is that when you are setting your catches on the shaft, you need to make sure you just get them to where they are snug. If you really crank the set screw you can strip the threads on the catch ( Yikes! ) The covers come a little out of form, so you might want to consider putting a few rubber bands around the covers while they are on the handle to help them back to their form before you installThe covers are there to keep the rain and dirt out of your key insert for the lock, you do not have to use them but they are nice to have the option. The two gaskets have a round plastic ring on them in the center. On some canopy's ( Topper/Shell ) the ring will not sit inside the hole in your canopy ( Topper/Shell ) frame. I had this occur for me upon installation, I just cut off that ring on the side that was going to fit flush with the frame that the handle secures to on the inside of the canopy ( Topper Shell ) You might not have to do this depending on your canopy ( Topper/Shell ) but it works well in my circumstances.These were an awesome deal and the vendor was great in getting these to me shipping wise. The price even with shipping was a bargain, way cheaper than I could find anywhere in my searches online and with in store comparisons. I am more than happy with the Bauer Locking T-Handle set. If your looking for a new set of Locking T-Handles for your canopy ( Topper/Shell ) that ought to last you a long time and at a good price, give these a try....I am sure you will be happy with them too.

This is a very nice, and functional product.Easy to install and very secure.I used these cabinet locks on a gun locker, they wirk beautifully.

Very good quality. Fit into the existing holes in the shell on my 99 Tacoma. Something that took me a minute (and a couple of reinstalls) to figure out: there are Left and Right locks (that are otherwise identical), so just make sure you’re installing the correct one on the correct side of the vehicle. They have to turn a certain direction in order to lock.The one downside: the keys seem to be identical for all of these—yours, mine, everyone’s. In fact, I spent 20 min or so swapping the old ones (bought the truck without keys to the shell) for the new ones, only to realize at the end that not only are they the same brand (no wonder they fit!), but they are also the same key!! I just got this truck (with a shell) and the shell is not new by any means. These locks could have been on there for years! And the key I got from amazon today locked the handles that have been on the shell for who knows how long. I would think that they’d have 5 or 10 or 25 different keys that they randomly ship so that not everyone in the Home Depot parking lot can unlock each other’s shells...

Works great! Easy install!! Would purchase again!!!

Great fit, replaced the old handles. I purchased a used ATC camper shell for my 17 Ram 2500. The owner did not have keys for the old handles. I purchased these and they fit perfectly. They came with little covers for the handles for the weather, not sure how long they will last on there or if I will lose them but seems like a nice gesture. Keys are nice and the locks lock smoothly. Overall very happy, installed in minutes.

Perfect fit replacements for my Vagabond truck cap. Maybe 30-45 min to install, and that's only because i had to drill the screws out of the old handles to remove them.

Works as intended and installation was a breeze only took about 10 minutes