Shintenchi Over The Toilet Storage Cabinet, Bathroom Shelf Organizer with Anti-Tip Device Small Freestanding Space Saver with Adjustable Shelf，White

I don't see anything wrong , I like it.Usually cheap furniture features many minor problems, and you accept it because . . . well its cheap.But not this over the toilet cabinet. Dimensions are perfect, cabinet doors magnetically hold closed, panels are thin but all pieces and parts had zero defect. At least one extra qty of all fasteners.Instructions have no written words and a little lacking when it comes to indicating panel side should be facing which way. My 20 yo daughter assembled most of it (I helped her instead of the other way around, so she could learn) and I didn't watch over her carefully enough or remind her to always check which side of the panel is up/left/right. We ended up having to partially disassemble and re-orient a part, more than once. I'll chalk it up to her not knowing what to look for during assembly. Very good product, good price. Very functional and a clean simple design, easy on the eyes.

This is a nice solid over the toilet cabinet. I like how it was easy to build (I took my time, took about a hour.The glass windows make it look very nice. It comes with extra parts in case you lose screws and stuff. and it secures to the wall so it wont fall on you.PROS: it's solid, it looks nice, assembly is easyCONS: You will need help since you have to lift it over the tank to install it (I suppose you could not put on the bottom bar and slide it in but I don't recommend that). The security screws and brackets for the top that you need to drill in the wall are too small in my opinion. I had bigger ones so I used those and you NEED to use them as the cabinet tilts every time you open the door without them stuck in the wall.Overall this was worth the extra mone y even though it was particle board, than the "name brand retailers brands that are never in stock" and it has a window. I use the very top to store the TP so it's out of the way and then the odds and ends in that that dont go in the main medicine cabinet. I bet it would look good in black too but again, I went with white and i'm happy.

This over the toilet structure wobbles terribly despite placing support board under the shelf and wedges/shims on the floor. Very time consuming to put together, but the instructions and tools/parts were so well organized and spelled out. I also purchased a rechargeable small flat light for under the board that goes over the toilet, adds a nice touch.

Little flimsy but it does what we need it to do. It is a decent size, not too big not too small! It does what we need it to do so id say its pretty functional.

Strait forward building instructions. Only 2 moments where I needed help to install but it wouldntve been impossible for 1 person to execute. Smooth edges, no dents or paint chips. All parts included. Would've thought it was IKEA good quality. Works great, sturdy and has sufficient storage

Easy assembly, great functionality good value compliments the bathroom nicely!

The wood quality is just ok. You get bad styrofoam and a lot of "fuzz" and debris that are statically magnetized to this and has a passable, but overall, budget finish.My main gripe is IT IS VERY WOBBLY. The legs are bow and curl freestanding. Sure you can wall anchor it...but apartments...meh...iffy area. A lot of people don't live in a earthquake zone so don't bother. The boards are FREESTANDING ON THEIR ENDS with NO FEET or WIDER RIM for stability, which, in retrospect now that I have it in person, is an AWFUL DECISION. I had to go to the store, buy soapdishes, and they fit the legs providing feet...which "helped" the wobbles...but no where near cured. I still need this thing to "rise" higher.As per measurements, MEASURE YOUR TOILET WITH THE LID UP...There's a small space above my tank, but the lid interferes and gets STUCK under the middle rim.,.pulling it down you have to be careful as this whole thing will wobble...I'm afraid to put stuff inside unless anchored. Also keep in mind, you should have enough room to COMFORTABLY REMOVE THE TOP TOILET TANK COVER...yeah you build this thing and see a few inches of clearance...then you have to fix your flush mechanism...and yeah...you have to disassemble the shelf to get the tank lid off...not fun.So MEASURE with the LID UP and add clearance for REMOVING THE TANK LID.There's a rear behind the toilet bar used for support, but it's cumbersome putting it over and taking it off the toilet, as the top of the shelf will hit most ceilings fully assembled. Sure you could take the top half off, but the screws are interior of the middle rim and you most likely won't be able to reach the screws with the tank lid being so close to the underside of the middle rim(cabinet bottom). Now you're screwed. That's another reason to add and have 5-6 inches ABOVE the tank vs. 2-3. I had to put the legs on first, then put the cabinet on and screw it on over the toilet already, freely sitting while it's standing upright and not flat on the floor...I wish this were designed better so I didn't have to do that.Now for the wobbles...here's another reminder. Some people won't mind the wobbles as they're used to wall anchoring furniture. To me it's really bothersome there's not proper feet on the legs forming an L rim. Once you get over that...you then realized BASEBOARDS prevent the cabinet from reaching the wall...forcing you to forego much needed wall anchors...or tilting the cabinet back...which also is not a good idea. ALSO, if you don't have baseboards, bathrooms and rooms in general are rarely straight and 90 degrees. If you're wall slants a bit...then you really hate this cabinet as you can't get the back of the wall to support the entire cabinet from feet to head, making wall anchoring difficult. Bathrooms often have tiles on the bottom, drywall on top...that will often create a GAP on the top of the cabinet when you have the legs against the tile walls.Overall I wish I never ordered this, so many things have to go right, so to remind everyone:1. Make sure you have about 6 inches of clearance on the top of your tank...don't settle for 2 or 3...your hand will have to go under that with a crappy screwdriver with a contorted wrist while your toilet seat creaks while you lean on it and HANDHOLD the cabinet up with one hand.It is not enough to measure your toilet top to bottom and see it's under the measurements provided...you'll need MORE SPACE.2. Make sure your bathroom walls are STRAIGHT and 90 degrees with no baseboards.3. Hit up walmart, grab some hearthstone vanity dishes...or build feet...you may need wood skills and extra power tools/saw for this thing.

East assembly and looks great in bathroom. Attached to the wall for extra stability. Enough room to take toilet tank cover off if needed.