CPVANIndoor Motion Sensor Alarm with Siren, Remote Control Wireless Infrared DIY PIR Motion Detector Burglar Alarm System, 125dB Adjustable, Battery Operated, for Home/Shed/Garage/Van/Shop.

The alarm is really compact and size and can be positioned on a surface or attached to a wall or ceiling. It comes with screws or sticky pads to attach it. The unit comes with batteries too so you can have it setup in minutes. The setting up process took me less than 1 minute and was really easy.It comes with a chime or alarm to alert you of movements, you just press a button to change it. You can activate/deactivate the alarm with the little fob, this worked from outside the garage with the door shut, this is useful. You can get additional fobs if you need them and these can be paired to the device.I have set it up in my garage but this would work perfectly in a shed, caravan, or a porch to notify you of a movement. I tested it and it works perfectly. The alarm is loud, I did a test during the day and i could hear the alarm clearly from upstairs. It would be even louder in the dead of night.I am really happy with the alarm and I would recommend this as great value for money.

I bought this as I needed more security in my home. It gives me peace of mind to have this motion detector by my front door. The alarm is loud and the remote to turn/ off is great. Its easy to use and I am happy with how it works. A really good home security find and worth buying.

Remarkably effective for the price. Small and unobtrusive, and yet works effectively and packs quite a noise when it goes off. The remote is wireless so works through doors and walls. And CP Van tell me I can operate it off the mains via an adaptor and micro USB cord, so no need to worry about batteries going flat (I have not tried this yet).Only four stars because there is no entry delay - if you forget to unset it then it goes off immediately you walk into the zone. Also, the remote is wrongly marked. The button marked to unset it is actually the one to change for it chiming to full siren. And vice versa! Plus there is a SOS button which is unnecessary on a simple alarm - and it is at the top and if you hit it accidentally the siren goes off.

This is the second alarm I have purchased of this type. First one was purchased for my garage and this one for my shed.The alarm is simple to install, just mount the bracket and the alarm unit easily clips into place. The bracket allows the unit to be adjusted for the correct angle to provide good PIR coverage.The unit is easy to setup and the remote in pre-paired meaning the unit can be used straight from the box. The manual is informative and comprehensive.Operation is very simple with enable and disable pushbuttons on the remote. There is no entry or exit delay so the alarm has to be armed/disarmed outside the field of view of the PIR. The remote control is small, seems to be very responsive, can be used at a distance from the alarm and even works through walls etc.Based on the first alarm I purchased the battery life is good, about 4 months of life from three AAA batteries. Batteries are also supplied.The best feature of this alarm is the noise, it is unbelievably loud and just what you need to protect a garage or shed.The build quality is good, it's well made and solid construction. I have had the first alarm for about 12 months now with no issues at all. Overall I'm very pleased with the alarm and I would recommend it.

I have 2 of these and use them to protect different parts of the house. They can be matched to work off the same remote signal but I use them independently. They come already programed so it's just a matter of putting the batteries in and understanding the various mode and volume options.The alarm mode is very loud and I like that but when the battery gets low it emits a loud beep every 40 seconds. Unfortunately as luck would have it my batteries got low in the middle of the night and I have to get out of bed, take the alarm sensor down from the wall and unscrew the battery cover to replace the batteries. There is nothing in the instructions to say if the annoying 40 second beep can be muted without dismantling the alarm and removing the batteries.I've contacted customer service on the matter and despite advertising that they aim to reply in 24 hours they didn't even bother to acknowledge receipt of my email and needless to say my questions remain unanswered.

These are fantastic and the alarm I’d quiet loud

To set up either read the instructions or watch the video. Download the App. Pair the door /window switches, remotes and main device. Stick the switches to where ever you need to monitor and thats about it. The main unit itself has the motion sensor on it. The main unit does have battery back up in case of a power failure but it should always really be plugged into a USB power supply so bear this in mind when positioning the main unit or how you intend to use the unit. Set up and sticking the sensors took about 30 minutes from start to finish. The sensors to the main unit do not require an internet connection. The sensors can be named in the app and individual sensors can be either switch on or off including the motion sensor. The system can be armed with either the app or with either of the 2 remote controls. Overall very happ with the purchase and how easy it was to set up and to use

Unit itself is fine and gives a good,loud siren.The problem is the controller fob. It is ultra sensitive and thus easy to press whilst in pocket or hand which triggers the siren. This lets it down and as they only give you one. If you lose it you’re stuffed.