Mount-It! Single Monitor Arm Desk Mount | Gas Spring Monitor Arm | Full Motion Articulating Height Adjustable | Fits 21 22 23 24 27 30 32 Inch VESA Compatible Computer Screen | Clamp and Grommet Base

I've had the Mount-It! dual arm mount for quite some time, but I decided I wanted to go in a slightly different direction as the one downside to the dual mount system is an inability to adequately line up monitors with different bezel sizes to my liking. This is no fault of the previous mount, just me being a bit mildly OCD about getting my screens lined up. I also figure to be adding screens in the future so I wanted to try and find something that was a bit more flexible. I put this up against the Vivo single arm mount to see if one was better and this one is pretty good.It's easy to put together and easy to install a monitor to it. Rather than try to attach the monitor to the VESA mount while attached to the arm, this one has you attach the mount to the monitor, then slide it into a retention clip on the end of the mount. This makes placing and removing the monitor extremely easy if you need to make any adjustments to the actual monitor arm on your desk. The whole arm feels very sturdy, much more than the Vivo did and is able to hold much larger and heavier displays. It can hold up to 32" monitors, including ultra wide monitors as long as the weight doesn't exceed 20lbs.In the weeks since installing this arm, there has been no sag at all. The only issue I've encountered is there's a fair amount of shaking when even just typing, although I attribute this more to the desk not have a ton of support in the front. Either way, it's there and it's noticeable, particularly during extended typing sequences like this. So far that's the only drawback that I've encountered and again, could just be the desk.Overall, it feels very solid, holds my 24" AOC monitor up with no issues, and is definitely worth the price you pay for it.

I have very heavy monitors at work. I have tried and failed to get good stands in the past. I bought a similar model, but for 30 pound monitors that worked awesome. So I decided to get this single arm version for my home monitor because I only have a single 23 inch monitor. So I got the lighter arm. However, this is not a cheap product. It is heavy duty steel, and is easy to put together. I’ve only used it for a couple weeks at home, but I’ve been using the dual arm monitor at work for several months. In both cases, it is working great! I highly recommend this product for correctly sized monitors. Please make sure your monitor is not too heavy, and when you get it, definitely read the instructions carefully so you can properly balance the spring in these arms.

Bought this out of recommendation from a YouTuber I follow.Pros:-Good Build Quality-Easy to Understand Instructions-Looks Great-Great Range/MobilityCons:-Wasn't configured to hold monitor of any weight when it came out of the box. Had to crank the wrench so many times I thought the arm was broken.-The VESA mount. If you have a recessed VESA mount holes on your monitor, you must install the mount on the arm and then the monitor on the mount. There is not enough room within the recessed cavity of my monitor for me to slide the mount onto the arm.

I bought a monitor arm from Mount-it about a year ago and have had no issues, so I thought I would give them another go and have not been disappointed. The arm has a decent reach and easily holds my 27" monitor. Its range of motion is good and hasn't required any re-tightening.The assembly takes some work, but with average DIY skill a person should be able to put one of these up in 1/2 an hour. IT DOES NOT COME WITH M4 SCREWS. You will need those to attach a monitor to the arm. M4 screws can be found at most hardware stores.The arm came with wall and desk mounting brackets. Mount-it instruction sheet was easy to understand and very helpful. This is the best monitor arm I've found in this size. The value for you dollar can't be beat.

My 34” ultra wide Samsung monitor is at the upper limit of weight this arm I specified for but it holds it just fine after adjusting. Repositioning the monitor seems easy enough if needed. Arm holds the tilt fine. My desk is about 1” thick and clamping the arm isn’t a problem. Also comes with hardware to mount the arm through a hole in the desk. Cable management works well to keep things tidy. For my personal taste, I like how this arm doesn’t have visible branding. I was debating between this arm and another at 2x the cost. Glad I got this one. It does what it’s supposed to and holds a large monitor without an issue.

At first glance this appears to be a sturdy well designed mount able to mount with clamp or hole in desk. However, it fails at its primary task -- the ability to support a very light weight monitor. The package claims to support a 32" monitor. Older 32" monitors were fairly heavy. Now that monitors are back lit with LED they are feather light. I mounted a 22" LED monitor and the arm would not support it. Regardless of us tightening every screw in site, the monitor drooped back down to the bottom. We are outfitting a large office and this was our test case. We will have to look again to find one that actually works.

When I picked this up from my mailbox I thought it was OVERLY heavy for a monitor mount. But after installing it I realize all that heft makes this arm STURDY as heck! The gas spring arm is smooth and makes moving the monitor up and down silky smooth once you adjust the tension per the instructions.Included instructions are easy to understand and the mounting equipment comes with different mounting methods (clamp or screw into your desk). I paid a little more compared to some of the other options, but I don't regret it at all. I feel like it's worth the money because it feels quality and won't need to be replaced.Comes with all the tools you need to mount it to your desk and adjust the tension. You will just need a Philips head screw driver to attach your monitor. It comes with all the hardware you need for the vesa mount on the monitor.