Dorman 42631 Front Windshield Wiper Arm Compatible with Select Ford Models

Exactly replacement for 1994 F250 wiper arms. The springs are very stiff in comparison to the worn out originals that no longer could keep proper wiper pressure! Now the wipers work great! The on problem I had was that the little retainer clips were a little tight to engage, probably perfectly normal....just took a little bit a messing around with them to get them to click into the groove. A small rubber mallet may be helpful for install.

This did fit my 1995 Ford F150 XLT Extended Cab.

I used them to upgrade to the j hook style on a 84 c10. The downside I'd figuring where to mount the sprayer. 70s to early 80s it's mounted in the cowel area spraying on the windshield. Mid 80s to 91 it's clipped on the wiper arm. I drilled a dimple for the bump on the sprayer to sit, heated the tabs that hold it to the arms so they would grab on to the wider arm.

Needed slight modifications to fit, to much material on locking clasp needed to be ground down slightly. Easy enough to fix, springs in these feel very strong and arms have a nice semi gloss finish. Will see how they hold up. (Appear better then auto store brands I've tried on first glance

I used these to the replace the bajonet style arms on my 1977 C20 and they work great. Having the hook makes not only the selection of blades bigger, it is also a better connection with today’s plastic brackets. Had to modify the locking feature of the arms to fit my Chevy’s as my arms locking ring are less deep. Nothing a file can’t correct on the arms.

No instructions included. For folks not familiar; hold wiper assembly in front of you as looking at it mounted in vehicle with one hand on wiper arm and one on mounting end. Press thumbs in to bend wiper open. Slide the small hair pin clip up to lock wiper open. Slide wiper arm over wiper motor stud aligning splines to get proper positioning on windshield. Push wiper arm assembly down firmly on stud and push hair pin lock down to secure wiper arm on stud. Done. Go find some rain and test.

Does not fit my 1995 F150. The fit is too loose and the retainer clasp doesn’t slide all the way in so it cannot be installed correctly. It looks the same as OEM but is not!

I replaced the factory wiper arms on my 86 chevy with these. This allowed me to upgrade to newer style wiper blades which are easier to find and readily available!