Amazon Basics 10W Qi Certified Wireless Charging Stand, for Phone 16/15/14/13/12/11/X, Samsung, and More, with USB Cable (No AC Adapter), Black

It’s been working for almost a year and a half now! Much longer than the last wireless charger I had. Charges slower than a corded charger, but faster than other wireless chargers I’ve used. I like that it’s not bulky, and the cord comes out the back of it, so if you’re using your phone while it’s on the charger, you’re not damaging it by bending the cord.

I have an IPhone SE 2nd gen. This is without a doubt the BEST charger I've ever had for it. Fits perfectly, charges consistently, never overheats, and is decently quick.I LOVE this charger.Also, it's versatile and works on almost any phone. Can be used with the phone upright, or laying on its side. Even if your phone has a big camera lens bump on the back, you can just lay the camera on its side to charge, so the lens bump is off the charger. I sometimes charge mine on its side so I can read while it charges.Love this charger.

My current phone is only a few years old but it’s getting harder and harder to charge using the charging port. I’ve tried cleaning it and blowing it out with compressed air but the contacts don’t seem to be connecting much anymore.This isn’t really an issue if you have a wireless charger. This is my first one but it seems reliable. It takes a few seconds to begin charging once it’s on and it may charge a little slower than a wired connection but I’ll take that over inserting the cable a dozen times hoping it works at all. And since it’s angled you can still use your phone while it’s charging if you need to! And it’s cheap! Win win I say.Recommended.

Works well make sure you use an appropriate charging source. I have a powered usb port on my laptop that provides power when the laptop is shut down. However, this was insufficient, but the charger works well when using an adapter plugged into a wall outlet.Once properly set up it charges my iphone 16e well and my airpods. It is compact so fits on a crowded desk. It has a nice tactile feel.A good basic charger. Make sure to read the documentation. This was very helpful to clue me into not using my laptop for as a power with this charger.

The "Welcome Guide" which was essentially all picture showed the charging stand attached via the supplied cable to a generic wall charger. It said, "only use QC3.0/PD3.0 charger from a reputable manufacturer." The folded paper that also came with it also didn't show or talk about what kind of charger this stand likes or needs. I currently use an Anker A2669 wall charger (a fairly standard wall charger that has two USB-C ports and one USB-A port; I think that Anker qualifies as THE most reputable wall charger manufacturer) connected to an Anker 313 charging stand, which works fine, but it takes a micro-USB cable rather than an USB-C cable like this Amazon Basics one. I was hoping for a charging stand with a USB-C connector; that way if I need a quicker charge I can take the cable out of the charging stand and plug it directly into the phone.And, every time the Anker 313 charging stand gets hit by a powerline glitch, it starts blinking green and I have to pull the cable out of it and insert the cable again. (Standard tech support advice: "Do a power-off reboot of your device!") After this it works fine until the next powerline glitch. I used the provided USB-A to USB-C cable to attach the Amazon charging stand to the USB-A port on the Anker 2669. The Amazon charging stand light turned on, a dim blue. I put my phone (Samsung S24+) on it, and it started charging. Yay! But then about a second later, the light started blinking bright green. I looked at the manual and this said, and I paraphrase slightly, "AAAAAAHHH! NOOOOOO! I can't deal with this wall charger! StopitStopitStopit!" ("Incompatible Charger") I tried this several times to make sure it wasn't a one-off. Nope, happened every time. And this charger supports PPS, which is a backward-compatible enhancement to PD3.0. I also tried this on an Anker 2039/523 which also supports PD 3.0, and the same thing happened: blinking green light, refusing to charge. I tried plugging it into a USB-C connector on the back of my PC. The stand blinked blue but wouldn't charge the phone.

Why did you pick this product vs others?:Needed a new charger and my friend said it was a good one.

Good price and works great on my iPhone with an otter mini case

Works great on our IPhones but our first one stopped working after a couple months. I’d say worth it for the lower cost if you don’t mind replacing. It does charge our phones quickly and if you have the correct phone case you don’t need to take it off which makes it easy to use. Uses standard USB port so we had plenty of those on hand.