airgooAddressable RGB PC LED Strip, 13.78 x 0.39 x 0.12 inches Clear Silicone Covering, for 5V 3-pin argb Header, Built-in Eight Strong Magnets, Easy to Install

This is a good discrete kit for adding addressable LEDs. The magnets make it easy to mock up and ultimately install the strips using the self adhesive.Be aware, for a Cooler Master RGB/Fan Hub the connector on the provided aRGB interface cable was a little too wide to fit into the hole in the Hub case. This would probably not have been a problem for my motherboard directly and it was easily remedied by trimming away some of the rubber on both sides of the cable's connector using a hobby knife. For those not wanting to modify the provided cable you may want to consider using a stock Cooler Master cable and moving pins between or splicing into the "three" pin locking connector used on the strips. It looks to be of the standard RGB LED, again "three" pin. I docked one star in my review on easy of install due to this, but otherwise I am very happy with the provided parts.They are bright enough for projected light to be seen behind a smoked acrylic cover of a Cooler Master case. I have them tucked under the upper and lower lip of the case. So far the are still in place and the adhesive appeared to grab well during install.For install and size comparison, in a CM TUF Q300L the LEDs reach the entire length of the upper and lower lengths of the case. The provided interface cable and extension worked to get the strips installed and wires routed out of sight. They are working with ASUS Aura on a CM RGB/FAN Hub perfectly.

While I wish these came with two of the MSI Mystic Light adapter cables/extensions, so I could connect one strip to each of my motherboard's ARGB headers to create different effects, for the price, I don't reckon I can really complain. They work very well, and they're easy to install. I especially like that they're magnetic, so I can move them around inside my case without fuss. I decided to put one of them in the top of my case and put the other one in a drawer to keep as a backup should I ever need it. It added just the right amount of subtle RGB lighting to my (mostly) blackout build.I definitely recommend them.

I purchased a couple months ago,(https://www.amazon.com/gp/product/B07NXW4K5T){Digital RGB PC LED Strip, Airgoo Computer Magnetic Addressable LED Strip Kit, Motherboard with 5V 3-Pin RGB Header for Asus Aura, Gigabyte RGB Fusion, MSI Mystic Light (42 LEDs, RF Controller Include)}The 2-LED-Strips were bright, and the controller worked as expected. In the "NOTES" section.* When you use the controller and the SATA cable, the led strips can Daisy Chain 4 strips and more.So, last week, I purchased (from this same page)(https://www.amazon.com/gp/product/B07DPNNTHJ){PC Digital RGB LED Strip, 2019 New Addressable Magnetic LED Strip Light for 5V 3-Pin addressable LED headers, Compatible with ASUS Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync Motherboard}And the 2-LED-strips are a lot dimmer the the first batch, and connected to the same controller..Since the "NOTES" says "Daisy Chain 4 strips and more", I've tried that, and it does NOT work.I don't know if you can see the image clearly, the LEFT-TWO strips are the first batch, and the LEDS are bright. The RIGHT-TWO are dimmer. Also, having ALL 4 daisy-chained, if you notice, the entire LED-strip of the far left does NOT turn on at all. And the 2nd-strip from the left , 5 LEDs of the top does NOT turn on.If I connect each strip separately, to the controller, all the LEDs work, ... and if I connect two-strips, both strips all lights up. But, When I connect the 3rd strip, the LEDs stops working. I'm using the SATA cable, and controller, and NOT the motherboard.***** UPDATE: Dec 10, 2019. (changed from 3 stars to 5)With the 4th strip not working, after thinking about the problem, I remembered when I first got the controller. I went into the "setup" (with limited instructions) and noticed that you can turn individual LEDs on/off. I turned them all back on. And, now, all 4 LED strips are working. But, I still have the issue that the last 2 I bought are dimmer than the first batch, ONLY when I have the brightness on the lowest setting. If I turn the brightness to max, then you don't notice which one is dimmer than the other.Also, with the controller, and the setup, I somehow "swapped" the red and green buttons. When I press the "green" button on the remote, the LEDs turns red, and when I press the "red" button on the remote, the LEDs turn green. The "blue" still works. I can't find info on how to reset the controller. Or, what I did to swap the buttons.

easy installation with good color accuracy and adhesive magnet quality. looks nice and isn't too sharp on the eyes. Length for me was perfect for installing on the top and sides of my pc but it has one caveat in the length department. For whatever reason, the motherboard 3 pin cable was installed onto the extension cable meaning if you use something like a fan hub that sits in the back panel / bottom of your pc area you will have to plan accordingly, if you plug it into your motherboard only though, you'll be just fine. solid quality on the magnets and lights no complaints but the end that isn't plugged into an extension does stick up so tape it down if you'd like.

The media could not be loaded. Pros, Everything. Addressable in ASUS Aura. Software more complicated than installing the LED's. Just plug, stick to frame, and go. Easy Peesey! With Aura Creator you can build almost any lighting combination. Aura Creator only works with ASUS Armory Crate software built into high end ASUS MOBO's that support Aura. The strips could be a little longer, 13" from first to last LED, but for most it will do for the price. They work, no issues, no complaints. I have the AirGoo RGB LED's also in this system, had them for a year now with no issues. AirGoo makes a great product so far to my knowledge, I will by from this manufacturer again.

Vibrant colors, bright LEDs, extremely high quality for the price. Lengths in which you can illuminate your entire case however you see fit! Adhesion or magnetic application both work good and as intended!

All LEDs working. Magnetic strip holding in place.Installed in Lian-Li 216 with lighting effects driven by MSI Mystic Light (B550 Tomahawk).Have the 2 strips daisy chained.Using the 5v 3 pin plug along with the extension to reach where I needed.Will update if the strips end up failing.