FIAMM 72112 Freeway Blaster LOW Note Horn

Pleasantly loud and solid build quality.Was able to fit to a Suzuki DR650 but needed to remove the rubber mount and make a small adapter, which I 3d printed (see pictures). Works great with the OEM wiring but had to minimally modify the plastic interface, easily doable with snips or scissors.

This horn is perfect for my needs. I wanted something with a little horsepower to match the bike, the factory (meep-meep) horn was pitiful. I also wasn't looking for an air horn or anything obnoxious. This was easy to adapt to my bike, I do wish the mounting post was longer , I could have had a better install with a little more material to work with, but it's fitted up fine and was simple to figure out. It was plug and play with two paddle connectors. I was able to bend the factory horn mount 90 degrees so the horn mounts flat to the side of the bike. It sounds much different (HONNNK!) and much louder than the original . Pound for pound this was the best return on investment of any of my modifications, I can't speak to longevity but out of the gate this was a great investment in my safety and further customizes my ride with an appropriately matched horn. It's black plastic and blends into the look of the bike in such a way that it does not draw your eye, which is exactly where I like it , camouflaged. Clearly, I'm very happy with the product.

This horn has to be placed correctly so the hood will go back on my Ryker, and it was easy to install. Whats amazing is how loud this horn is. I was amazed, What a bargain. Great modification for a Ryker900. If you want to be heard, this is the horn!

Works on KTM390 Adventure.Plugs right in. Sounds like a car, not a choking roadrunner.

Review 2024-02-23 - FIAMM 72112 Freeway Blaster LOW Note HornIf you input your vehicle type into Amazon's part finder, this horn is listed as incompatible with a 2023 KTM 890 Adventure. This is not true. It is a very easy swap with the feeble KTM stock horn. I installed it August 2023 and it has been working like a champ ever since (currently Feb 2024). The way it sits with the stock "skid plate" allows it to be mounted with the horn port facing down. Mounted this way the port sits just above the skid plate opening, but a few inches back so mud, water and debris from your tire won't get slung inside.The stock horn is attached to an angle bracket - maybe you can see the hex-screw in the photo above/left of the horn. Just remove that, unplug the cables, replace the stock horn with the FIAMM on the bracket. Plug the pos/neg cables in first before you re-mount the bracket since you won't be able to reach them afterward. Takes about 5 minutes start to finish.The stock horn was difficult to hear over the motor/wind at just 45 mph, and completely inaudible over 60 mph. I can clearly hear this FIAMM low horn on the Interstate over 70 mph. I've not had to use my horn in traffic (yet), but I use it frequently on back roads, mainly at night, to warn animals around corners and over hills. Its loud.So far, highly recommended. As always, if anything breaks over the next couple of years I will update this review.

I just received this horn and put it on my motorcycle, I could not be happier. It is ridiculously loud. It’s as loud as my car horn, was very easy to replace this horn with my OEM horn on my Africa twin, I feel safer highly recommend.

I was able to replace the weak OEM horn on my 2016 Nissan Rogue with this new FIAMM 72112 low Note Freeway Blaster horn. Please note you have to replace also the High Note horn with the FIAMM 72102 to have both High/Low tone horns work together in pair. Now we have a horn that makes you get noticed on the freeway. This means more safety on the road when driving because you have a strong honking to alert other distracted drivers. It sounds powerful, like it is meant when you have a big car. Of course the new FIAMM horn specifies it can not be installed on the Nissan Rogue but I was able to install it perfectly without the need for any modifications (no cable splicing, no drilling new holes). Though due to the location and design of the front fascia on the Rogue I needed to remove the front bumper, but you do not need to take it to any shop. It fit as expected and best of all it sounds like a Big or medium size SUV. Happy honking.

Easy to mount or install but nothing crazy on volume. Not super loud but what can you expect for such a cheap price. Wiring also doesn't matter in terms of polarity unless you are mounting in series. But overall looks like normal horn. Concerned about safety on motorcyles.