XSPCLiquid Cooling Easy Cut/Easy Bend PETG Tool Kit

When opening this package, it came with everything pictured.The sandpaper - Not much to say about this. It's sandpaper.....The Bending Tool - This bending tool feels cheap, but has not let me down. It has a hole for the tubing to go through to help hold the tubing for your bend. The degree numbers are very easy to read and works great. I personally bend it up by eye, but for someone who is looking to do exact bends, this is will great for them. This tool is made for their XSPC PETG tubing only. You can use other tubing if it is the SAME SIZE. 16mm OD tubing for example will NOT fit.Tubing cutter - I can't say how much i love this cutter. I have a ratcheting tubing cutter, and it does not compare to this thing. This cutter gives me the cleanest, most precise cuts. I have used it at least 50 times, and still working greatBending Tube - This white rubber piece fits very nice in their PETG tubing, and is very easy to handle. It has a very nice length to it; which is a huge positive. There is not much else to say. I have used this one bending tube for 75 or more bends.Chamfer tool - Works just like its supposed to. Not much to say about this.Overall - This toolkit works amazing with no issues what so ever. Everything comes just like in the picture, and everything works great. This price for the tool kit is well worth the money, just for the tubing cutter.

A must have item if you're bending XSPC PETG tubing. An inexpensive kit that makes bending XSPC tubing very easy. Comes with the bending tool, rubber insert, cutter, chamfer tool and sandpaper.Using the kit was very easy, the directions were easy to follow and there are some good videos out there to watch prior to bending.My suggestions, use a good heat gun and buy some extra tubing just in case you mess up a few pieces.This works with the XSPC tubing with an OD of 14mm and an ID of 10mm

well once you read the directions, everything is easier LOL.. cutters are nice if you use them right, i turned the tube in the cutters allowing for a smooth clean cut and no crimping, chaffer also cleaned decently well..would prefer the chaffer bit but if only doing 1/2 loops this is fine, be sure to use the sand paper after as well to make sure everything is smooth. the silicone does its job, make sure to keep it lubed with soap after each use as it warms up, looses viscosity.

The only thing worth it to buy this kit is the cutting tool. It's amazing. Practice needed for straight cuts but you'll get it. Everything else is meh or bad .... flexible tube filler didn't fit inside the tubing .... the bender is ok but you'll need a free form (no handle) bending form for a lot of your bends .... and the trim tool .... I'm not allowed to use the words best to describe that piece of junk..

Perfect for making neat looking bends, the shears make really clean cuts, and the sanding kit is a nice touch. Unfortunately the silicone insert didn't work with my Primochill tubing but since they're different brands and silicone is inexpensive it's not worth docking a star. Quick ship too. I get most if not all of my water cooling supplies from Titan Rig and they ship super quickly and I've never had a problem!

Great product. Everything works perfectly except the silicon insert. I ordered a different insert due to the reviews on top of this order and ended up not using this white insert at all. Maybe it works with xspc tubing solely but even with any manner of lubrication the insert will not fit in tubing. I used primo chills petg 12/14mm and it makes it an inch into the tube then begins to bunch/stretch/not go any further. Everything else cuts clean lines, bends great angles and tapers perfectly

Not sure on some reviews but i used this for primochill PETG tubes and the silicone insert was perfect the cutter perfect 1 cuts my hopes were low reading some reviews but not sure if they updated mine to a new version???Also used blackdecker heatgun on 750w settingMaybe not the best but this was my first rigid tube build

No quality control, and I dont make this comment lightly; I use lots of other XSPC products that are well made. The only decent tool in this package is the chamfer. The first thing I noticed is that my set of piper cutters is unevenly rigid on the inside (along the curve where the tube rests) so it cuts at an angle. Most importantly, the "rubber blend" cord for shaping has a very low melting point compared to REAL silicone cords; it melted to the inside of an XSPC PETG tube under low heat. Once i had made the bend (keep in mind that the rubber was inserted well past the heating point and the tubing showed no signs of overheating) the rubber could not be removed, leaving me to have to cut it out. At which point I discovered it had melted to the inside of the tube and was now too short to reuse. The angling tool is cheap plastic and annoying to use. Finally, the sand paper is useless; it's almost as smooth as copy paper.