ENA Engine and Trans Mount Set of 4 Compatible with Mazda 3 2004 2005 2006 2007 2008 2009 2010 3 2.0L 2.3L (No Turbo) Automatic Transmission Replacement for A4404 A4405 A4418 A5312 9196 9222 3103 9632

The seller didn't have many reviews so I was skeptical but I still ordered anyway. I was surprised as to how quick the parts came. They work perfectly for the hatchback. The only part that is a bit different is the passenger engine mount. I had to bend it to go onto the other part. Overall, after replacing all 3 parts, the car now drives smoother and the rattling noises are finally gone.

These are good mounts for the price. One of the bottom mounts required me to open the bolt holes just a tad with a file so all three bolts lined up. Be careful with this as you don't want to cross thread a bolt into the transmission. On the passenger side mount make sure you bend the metal ear over on the reused factory aluminum bracket. These made a world of difference on my 2005 hatchback 2.3L. Both the driver and passenger side mounts were shot.

The product is good with the ease of installation. It only took me about 45 min. change out the top 2 mounts once I removed everything else.

Overall, the 4-piece set looks to be of good quality. They all matched OEM units and installed easily except for the rear torque mount (the unit with the bushing that attaches to the bottom of the transmission housing using 3 bolts). One of the holes (the most bottom one) was off and prevented the mount to be bolted onto the transmission housing. To remedy this, I had to enlarged each of the holes very slightly using my drill press to allow sufficient clearance for installation. It is unfortunate that this piece was manufactured incorrectly as everything else appears to be good quality. Although the original torque mount on the vehicle was still good (dont usually wear out as it is merely a metal bracket and a bushing), it attaches to the rear engine mount and the two units are usually made to match each other in tolerance.Note: Vehicle is 2004 Mazda 3 with 2.3L engine. Also, I have 40+ years of experience working on cars and have installed motor/transmission mounts many times before.

The bolt holes on the transmission mount do not line up with the bolt holes of the transmission. Also, there was no new bolt to hold the 2 transmission mount parts together. The bolt threads from the old trans mount did not match the threads of the new mount. My car is still up on jacks waiting for a new transmission mount. Poor quality!

These mounts worked perfect. No fitment problems. The post mount (passenger side) does require you to reuse the OEM bracket but it’s nothing too involved. Total time to replace all 4 mounts was around 45 minutes. And the car felt like new again. Could barely tell it was running.

Working perfectly on Mazda 3 very easy to install and made the car fell like it was brand new. Great value for the money.

No more sound. In fact it feels like the car is not running! Great product and fits as described!