Weber 63788 Q320 Igniter Kit

Our 9 year old Weber 3200 was on death's doorstep. We used a few videos from Weber online (the Australian videos were fast, clear and easy) to really clean the grill and replace both igniter components in this kit. This #63788 kit was recommended by Weber's website, but the price was similar and shipping much faster with Amzn. Buy it here. Replacing the igniter components took about 15 minutes (max) and worked like a charm. Cleaning everything for 45 minutes made the grill like new. For less than $50 the grill works like it was year 2 again. Don't spend $500-$600 on a replacement grill. Spend less than $50 and an hour to completely recondition it. This kit and the videos made it a breeze. TIPS WATCH VIDEOS - Skim the long, detailed directions that come with the kit but check the weber yt videos (Weber Australia). The videos show how to use a flathead screw driver to remove the old igniter components easily...no fuss, easy and safely. BUY HERE - Buy on Amzn. Similar pricing (maybe lower with shipping), much faster and better/easier return if necessary. MATCH MODEL - Match the model number in the photo to the igniter in your grill. Take a photo of your igniter with your phone and compare. Perfect match. The photo in the description is very helpful. INCLUDES BATTERY - It comes with a AAA maxell battery (not shown or described)! No need to buy a new battery. TEST IT - Test the igniter before taking out the old one and installing the new parts to be sure it works. We tested it before dismounting the old one. FLATHEAD SCREWDRIVER - Use a large flathead screwdriver to pop out the old module easily (if you know where). The video shows best. That screwdriver makes unscrewing the other component easy too (no need for wrench). GLOVES - Wear gloves (nitrile) unless the grill is very clean already. 2nd PERSON - A second person is not required but can make it faster and safer. They can hold lid open, hold gas tubes when removing/installing, etc. SAFETY - Always turn off and unhook gas first. Even air it out in a safe outdoor location to be sure no gas anywhere in tubes. note: We were not compensated in any way for this unbiased review. No one should be.

Product is an exact match for the original and works perfectly. Press the button and the spark is strong and continuous. It lit the flame immediately without any adjustments.

First purchased a cheaper version that didn’t fit correctly that I returned, this one snapped right in, came with a battery and was working perfectly within moments noting I didn’t replace the included bolt in electrode as yet but will likely install it next time I do a deep clean but for now 100% satisfaction

Factory part, made very well and it fit perfectly! Price was right and it works very well!

I wish I had bought only the "black box" electrical part instead of both the igniter and the black box (I should have bought part# 80453) instead. The black electrical box will fit any of the grills listed (I have an older Q320 model this supposedly fits), but the spark plug part does not fit the older grills, which use an an entirely different design "spark plug." My experience is that the spark plug doesn't really wear out, so save some money and think about buying the 80453 part instead, especially if you have an older grill. I can't complain too much though - my grill is fixed and working well now. It is a silver button color instead of the old one which used a red button color, which I didn't mind. It is was very difficult to remove the old button assembly, and I ended up breaking it on the way out. make sure both parts of the "red button" are removed from the front (there are two), before jamming two screwdrivers in there to release the tabs (that's what the instructions say to do). I didn't have both the ring and the button removed from the front before trying to remove the electrical box from the back.

Replacing the igniter was much easier than I thought it would be. The entire job only took a couple of minutes. (I was replacing the burner tubes at the same time, so those had already been removed.) Once I put everything back together again, the igniter fired up with no issues. That part, along with the new burner tubes has made it seem like I have a new grill.

Was very easy to install new igniter for my gas grill! Factory part matches the original & works perfectly.

My BBQ starter would click but would not ignite the flame. Installed new starter and problem resolved.

Excellent service, ordered and received from the US to UK in 8 days,brilliant service, thanks

Fabulous, thank you. Lesson learned: Always buy the original part from the authentic manufacturer. This is the REAL thing, so of course it fits AND it works properly. Cheers to the genuine Weber BBQs.

top Ware super Preise und sehr schnelle Lieferung es gibt keinen besseren Grillshop als diesen wenn ich was von Weber brauche kaufe ich es im Grillshop.at Ps. werde nicht dafür bezahlt oder bekomme extra Prozente

Worked great and fixed my problem. My original igniter quit after just a a couple of years. Hope this lasts longer.

In Australia there's the Q3000 and Q32000. This part fit as expected and works very well. fyi: The higher model is a Weber store "only" model that upgrades a piezo ignitor to electric on, and adds a thermometer to the lid. Helpful hint: Check out the condition of your gas burner tubes when you upgrade your ignitor. Ensure that none of the holes are rusted shut (especially near the ignitor) and that the tubes aren't rusted through anywhere. If so, you should replace them while you're at it to save a lot of headaches and possibly thinking that the ignitor isn't sparking in the right place. Ask me how I know! Haha.