Dremel 199 Rotary Tool Accessory Carving Bit- Perfect for Wood, Plastic, and Soft Metals

I bought these for my wife and she used them for crafting. They work exactly as advertised.

ok

I used this to widen the scratches on my boat for repair. Worked like a charm!

Works well on soft materials, like plastic and wood. It doesn’t cut too aggressively, which makes it easier to control. I’m using it to sculpts small wood turnings.

In past 3 years and during the winter that product was got in time and I used this product for carve the metal,plastic,and wood that I need thank you.

I recently built a shelf using about 70 pocket holes and 70 pocket plugs. This time around the wood was Red Oak and so were the plugs. I did not cut the Red Oak plugs down ahead of time which would have made them more flush, but instead I cut the Dremel cutting guide in the "Dremel 565 Multi-Purpose Cut Kit" so I could approach the plugs and used the 194 bit raised to about 1/32 of an inch from the surface. As long as the cutting guide was held flush to the wood it made mince meat out of the plug. To avoid creating a lot of smoke the bit is designed to cut in one direction (although if you force it you can cut in the other direction and create a lot of smoke in the process).Once I ground (routed) one plug down, I was able to use the multi-tool sander to flush sand the remaining amount and then wood filler as needed.I tried using a flush trim saw, but it was a lot work and if you don't watch it the saw can actually cut into the adjacent wood. This router/grinder worked much better and was consistent so long as you kept the cutting guide flush to the surface. For routing on narrow wood I clamped more wood to both sides and made if flush with piece of wood with the pocket plug.This router bit in this application saved me lots of time. Now that I modified my drywall cutting guide, it was time to replace it with a new one i.e. this purchase.

Used this after a 106 bit for larger lines in carving in maple and hard plastic. Perfect for carving wood and plastic. Sharp and remained sharp. Great to have in a Dremel tool box!

I purchased these on walnut knife handles as an experiment and it worked out beautiful loved how easy it was to use. My knife handle came out.