NEOTEC 45.4cc Gas Chainsaw, NS846 Powerhead with 16 Inch Guide Bar and Chain, Power Chain Saw 3.0 HP 2,24KW, All Parts Compatible with MS250 MS230 MS210 025 023 025 Chainsaw

I got this chainsaw to do smaller-ish work around my property.Last night, I did the first start and it was 11 degrees F outside. 5th pull unprimed and it started out of the box. Today it was in the high 20's and now that it's primed, it started on the 2nd pull. I didn't have to touch the carb. I always run my new saws a little fat and at 35:1 for the first three tanks. There is some conflicting information that comes with the saw. The tag on the saw says 50:1 but the manual says 40:1. I'd stick with 40:1. The carb is a little fat from the factory so it will need a retune after I'm done breaking it in.This thing runs great. It's got great power, the chain is nice and sharp, and it rips through pine like butter. I think it rips harder than my modded 46cc of another brand. The biggest stump I cut today was about 12" and I only bogged it once. I worked it for about 2 hours on a bunch of pine trees that are getting unsafe and I only went through 1.5 tanks of gas. It seems to feed the chain oil a bit slow but that may be because it's cold outside. I barely had to go to full throttle. Only when I was cutting the stumps.It's a great size and weight. I could easily climb with this if I need to, and I probably will. It's not much heavier than the 25cc top handle I normally use for climbing. It's super easy to handle because of its size and weight.The bar is plenty stiff. It doesn't walk or wobble. The chain is nice and sharp and it creates piles of chips in a hurry.I gotta say I love this saw. It's the perfect everything for its size. A super bonus is all 025/MS250 parts fit it. It's got an A074 tail piece bar so those are super easy to get anywhere. It really is a superb saw for a fraction of the price of the saw it is a clone of. I highly recommend this saw to anyone looking for a little workhorse that can do big work.

Great little saw. I have the original version this is modeled after and I do believe this one seems to have the same fit and finish. It started quickly after a few pulls after gas was added. Idled nicely. Carb was tuned a little rich for my conditions, but was very usable. Chain was very sharp. First cuts were everything I expected. I look forward to using this saw more.

If you need a chainsaw that actually runs DO NOT buy this one. Right out of the box, followed initial startup instructions and it will not start. Gives many ways to contact, but none are answered. Not chat or customer service lines. Guess I have an expensive door stop. To top it off instructions admit carburator issues. You don't know this until after purchase. After all of this it isn't returnable.

This product has very good on line reviews so i bought it.. Cuts and runs great. Started on 6th pull out if the box. Lots of power. Well built and Bang for the Buck!

So far it's great! I have only ran one tank of fuel through it which was all at one time. It ran great and has lots of power and its a light saw. The chain is nice and sharp. It will be used consistently for firewood. More updates to come. 4 star rating is only because I've only used it once so far.

The media could not be loaded. After tuning the carburetor and opening up the exhaust a little bit. See pictures of exhaust. Chainsaw runs really well cuts really fast and very pleased with this purchase.I do have to say it did not run super well right out of the box it idled good but in the wood, it did not have a lot of power until tuning the carburetor. also on the side of the air filter cover, it tells you the turns out on the carburetor settings. Those are not correct even at a starting point. It did not run well with those settings.Would definitely recommend this saw to others, but the understanding that you’re gonna have to tune the carburetor.

I received this saw in mid January now it is late February I have ran the saw several times and the starter rewind has already broke. The whole assembly has to be replaced. Before it broke it was a nice little saw. It started easy and ran good. I like the weight and balance of the saw. I am not fond of the flip up fuel and oil caps, but they work. I would like to see if Neotec would send me a new starter rewind assembly. I have contacted their customer service but have not heard back yet.

I think this is one of the best deals I ever got from Amazon. This saw was so complete and well-made and the price was very good. And Amazon gave me some kind of unexpected coupon that almost cut the price in half. I think this may be one of the nicest little saws I’ve ever got, and I have owned over a dozen chainsaws. It does seem to be a little heavy, but that is not a big drawback in this case. All in all, I am very pleased with this purchase.