Nilight 64" x 39" x 6" Universal Roof Rack Cargo Basket Heavy-Duty 250LBS Capacity Rooftop Cargo Carrier Luggage Holder for SUV Truck Vehicle

12-21-15 just installed.I've read many reviews on lots of different light bars. I decided on this unit. It looks great. It's very bright! I'm impressed.What you have to keep in mind is that this is only a $100 50" light bar. That's crazy cheap so don't expect the world. You will need the following items to install this light bar completely and make it look professional:a) purchase the correct light bar brackets that fit your vehicle. You will have to drill holes and install screws into the A pillar under the door seal. DONT drill it into the top of your roof and run the wires in the headliner.b) purchase the wiring harness made by Rigid Industries. 40190 wiring harness for a 50" light bar. REPLACE THE 40a FUSE WITH A 30a if using a 50" bar or size the fuse to match the draw of the light. (Note: to find amperage, divide the wattage by the voltage, the answer is your current draw). This particular harness uses 12AWG wiring to the battery feed and light which is what you want. Soldier the harness to the light bar. Use a heat shrink over each conductor that is soldiered, then a large heat shrink over the entire thing. Tuck it in the door seal leading to the hood.c) to prevent this inexpensive unit from fogging up or leaking, my son & I took the end caps apart and resealed them with clear "Solar Seal". This is a commercial grade roofing sealant. We also ran a bead of Solar Seal all the way across the top and bottom to prevent water from penetrating. Like I said earlier, this is only a $100 bar. The factory China gaskets are BASIC. so in order for this to stand up to the weather, you gotta seal it up extra.Further Tips:Don't forget to use rubber grommets when passing thru the firewall with the wiring. If you don't, they will short out over time.The wire harness does not come with any documentation. Your on your own. Find a buddy that is savy with wiring. I will tell you that the toggle switch provided with the harness has three poles which are not labeled.The gold pole is the ground (black wire from harness).The center pole is the load (blue wire).The other outer silver pole is the hot (red wire).GOOD LUCK!

Some defects in manufacture and poor packaging of product.One of the Stand offs had to be re-tapped on one end. The other end was recessed too far for allen bolt to reach. I had to draw out the threaded insert and reinsert it to proper depth.The wind fairing is not well protected in box. As a result it was received with one end bent over an inch and a half.The sized waterproof bag, stretch net and ratchet straps are a nice buying incentive.

Just finished installing the light bar on the front upper roll bars of a Teryx4 UTV. The curved light fits nicely around the curve of the Teryx4 roof as I hoped it would. The problem with the curvature is that the mounts end up needing to be mounted to a curved surface or fit exactly between the roll bars. i was going to mount this to a flat panel mounted to the roll bars... Didn't happen. Had to modify some additional mounts that I had from other ATV's. I wish now that I would have purchased the straight bar for installation ease. I haven't taken this on the trails yet but tried it in the yard. It turned night into day and made my headlights unnoticeable. There also are some issues with the manufacture of the unit. The assembly covers weren't the correct shape and noticeable gaps are present. I will be sealing this unit prior to taking it in the rain / streams.Update: Took the unit on a night ride in the mountains of Windrock Park, TN. The light performed great. The trails were lit up clearly at a far enough distance to drive at a rapid pace. The wide angle lighting made it possible to handle the tightest turns with confidence. There were occasional light showers and a week later no fog or leakage (I did seal the unit with RTV). I used the Mistuning 40 amp light bar wiring harness and it performed as advertised. The light bar held up well to the jarring terrain and moisture. I would purchase again if I had another vehicle to put it on. Changed the rating to 5 stars from 4.

Bought this for my 2019 RAV4 and it was simple to build even the quality itself was questionable but the mounting brackets were a pain as one was stripped, however, the size, fit and length… now, it could be better. Fact is, it’ll fit in the front bracket but the back bracket was a doozy but in the end, me & my dad just tied it down with bolts as much as we could in the back as the end bar was thick and the bar to put the mounting bracket was thin. It doesn’t move at all but if you’re a current RAV4 guy like myself, you have the option to rig it like I did or buy a lengthy one but since it was on sale for $97, just couldn’t let it pass. It look nice even visibility wise but idk, I’ll see what happens with it during my adventures this summer. Hopefully nothing happens. Praying.