RIDEN L298N Motor Driver Controller Board Module Stepper Motor DC Dual H-Bridge Compatible with Smart Car Robot

Description

Specification Logic Voltage: 5V Logic Current: 0 - 36mA Storage Temperature: -20 - +135 Degrees Celsius Working Mode: H Bridge Drive (Dual) Driving Voltage: 5 - 35V Drive Current: 2A (Max Single Bridge) Peak Power: 25W Note: - When your drive voltage is 7V - 12V (The picture indicates 12V input, and the actual acceptable input range is 7 - 12V.), the onboard 5V logic power supply can be enabled. After using onboard 5V power supply, the +5V power supply in the interface does not need to input voltage, but 5V voltage can be introduced for external use. This is a conventional application. - When the drive voltage is higher than 12V and less than or equal to 24V (It is proposed in the chip manual that 35V can be supported, but it is great to conservatively apply the peak voltage of 298 to support 24V according to experience.), for example, it is necessary to drive a motor with a rated voltage of 18V. First, the jumper cap of on-board 5V output enable must be removed. Then connect 5V outside the 5V output port. 5V enable is a 5V control signal. When the signal input is valid and the power supply in the motor drive module is normal, the motor drive module outputs current. Otherwise, even if the power supply is normal, there is no current on the motor. The voltage supplies power to the L298N internal logic circuit. This is an unconventional application of high pressure drive. Package Include: 1 x L298N Motor Driver Board Module