Kindling Splitter Log Splitter FireWood Splitter Power Log Splitter, Long Life CAST Steel Blade, Black (XL)

Makes quick work of medium large firewood and makes splitting kindling a breeze.Because it's iron it does dull or chip but a few minutes work with a file puts it back into working order.I wanted mine portable so I made a little rig out of scrap 2x4's I had and works great.

Bought this to chop 8” bbq wood chunks into smaller sizes for grilling. Works as advertised.

You'll need to mount this onto something else to make it useable. I used 4 x 4 scraps and fabricated a base for it. As other reviews mention, yes, it's a bit tricky to get to the screw holes, but if you use a longer driver attachment, it will work.It arrives quite sharp. I've probably made 1/4 of a face cord of kindling with it so far, and it's held up fairly well. There are a few chips in the blade at this point, but that's to be expected with oak and maple. I think I can just give it a quick filing or sharpening with a rotary tool at some point.You'll need some sort of hammer with this. I just got a cheapy one pound hammer at Harbor Freight, and I should have gotten something just a bit heftier. Something like a blacksmith 2lb hammer would probably be ideal.Watch your shins using this, though! Sometimes the kindling pieces will go flying, so at least wear long pants if not some additional shin/foot protection.

Very fast and easy to use. Mounted the SPEED FORCE kindling splitter on a round, and had a stack of kindling in no time at at all.

Very useful tool. You can split logs with it but it will be work, this is best for turning firewood that has already been split into kindling. Take it camping and you’ll be glad you did, the only tricky part is finding a log to screw it to. You want a log that is wide enough and has a flat bottom so it won’t fall over. Be careful screwing it in place because you’ll be working towards a very sharp edge, pre drill the holes and use a ratchet with a screw driver bit so you’ll be off to the side of the edge. It’ll take a little longer but it’s easier than a screw driver and you won’t have to worry about cutting yourself.

Mounted it to a log been splitting wood nicely. Recommend one if you have the space.

Es muy facil partir troncos y tablas de madera pequeñas . Como no , si solo hay que darle con un mazo!!. El unico problema que le veo es que si los troncos son muy grandes entonces a veces no se rajan de un solo golpe y quedan atascados en la base. Pero como herramienta muy buena para lo que se quiere.

Edge broke on first use. Picture shows edge after one 6 inch diameter by 8 inch pine log was split four times. No nails or metal in wood or branch knolls just clean pine log. I'm not going to try to re-sharpen it as it is obvious the steel is no good. I'll try to return it but the window has passsed. This splitter is totally useless and I thought I was purchasing an upper end tool. It's probably destined for the scrap yard. What a waste of money

Not much to say, this product is sharp (and can be sharpened), sturdy and of great quality.I use it to split kindling and gets the job done safely.Super dry wood it splits instantly, wood that is 18% isn't as easy but very doable.

I used this for the first time today. It is ideal to be able to place the wood on the splitter, give it a gentle tap with an 8 pound hammer to stabilize it, then give it a solid shot to split the log. No big swing necessary. Much easier and safer than using a wood splitting axe. Creating kindling should be a snap. I wish to extend my compliments and appreciation to the designer.

Works Well on small pieces

works great. good value

Très bien pour faire du petit bois et couper des buches en deux.