LIDYUK End Table with Charging Station, Flip Top Side Table with USB Ports and Outlets, Nightstand for Small Spaces, Bedside Tables with Storage Shelf for Living Room, Bedroom, Light Grey

This was so easy to put together. My husband and I accomplished the task in 15 or 20 minutes. It's designed well and pretty much stupid proof as the parts don't have to be in specific positions. The electrical outlet is very sturdy and easy to install. I like the storage and wider tabletop. I am using it next to my chair to hold books and charge phones, ect. It is made of fiberboard but for the price it looks decent and fits my needs.

Con:particle boardthin gauge metalslightly smallslight awkward assembly at the endPros:fairly sturdyeasy to assemble apart from the above-mentioned Consimple instructionsunit complete as advertisedall tool includedStarting with the Cons. This is Chinese particle board. It's not real wood. The leg material is metal but thin. My guess is thin gauge steel of some sort. It is coated with black paint. This unit was smaller than I had expected which could be a Pro depending on what you are looking for. If you want an end table for a low chair or couch it will be sufficient. It would fit very well in a small apartment to add outlets, USB, and efficient storage space. Finally, the assembly was straightforward part from the final two shelves. I'd recommend having a small box or an assistant to hold the shelves as they are screwed in place. For one person this part can be awkward and fatiguing if you have poor upper body strength.Now on to the good. For such a small end table it is surprisingly sturdy. Included are some screw-in adjustable end caps for the legs which make this much nicer for wood, or tile floors.The instructions are in total about 10 steps. I mentioned in the cons it is made of Chinese particle board which is true however I was also surprised by the finish on the parts. usually, there are blown-out cornersor rough router marks but this was finished fairly well. I hate that my expectations are so low that I was surprised by that but the finish on this particular piece was quite nice.They even added a miter cut for the drawer bottom so the electronics cable could be routed without additional fitting. The until came with all the necessary parts but more importantly, it also was exactly like the picture.Again, I hate that in today's world I have to write that but it is true. The outlets sit where they are shown in the picture, the size is estimated as close as possible, and overall if your expectations are correct for an$80 end table then you will not be disappointed. The last thing that I'll mention about the pros is that all tools are included. The only two tools I needed were a knife for opening packagingand at the end one of the foot didn't want to screw in so I had to use a pair of pliers to get it past a manufacturing defect in the tapping. Beyond that, you only need the included Allen wrench and a Phillipsscrewdriver. The one included is a nice size too. IT was study and fit the small screws exactly. There were only 8 screws so this was a bonus for anyone not in possession of a Phillips screwdriver. You might keep it for a while to use around the house.Overall I gave this 5 stars. I only took one star away from sturdiness as I have no idea how sturdy it will stay in the future. The long Allen head screws seem to be well placed in the particle wood. The question will be the wood as the screws seem well suited for the job.If the wood holds up then this would be 5 out of 5 for sturdy again with the understanding this is a light-duty end table made of particle board. It's a step up from Ikea but not by much. I wouldn't sit on it but you'll be ok to put a lamp, computer, coffee, and a small house plant. If the cat jumps upwith all that it may become sketchy. At this time I'd recommend the product. It is doing the job I bought it for and I'm overall happy with the fit and construction for the price. If the quality were to be less then I'd price this much lower. Since there was some attention to detail I'd say it's priced about right. Anywhere between $50-80 would be correct and a good buy.

It arrived on time, although it was left out in the pouring rain.The table is cute, functional, and easy to assemble. I love the urban rustic look of it. It fits great into a small space, but the table is smaller then I thought it was going to be. Still, it will do the job of having a place to put my laptop when not in use.I wanted something with a drawer. I thought the little compartment on top would do the trick, but now that I see the size of the top of the table the compartment probably won’t get used because I’ll have to move my computer out of the way to get to it, not a big deal but is an inconvenience and a drawer would have been better.My biggest dislike about it is where the electrical outlets are. A big reason I chose this table was because of the USB and 2 electric outlets it has. However, they are in the back of the table and you can’t put them facing front because the electrical cord is connected to that same base. Also, the table top comes out about 4 inch past the base where the outlets are, so the outlets are very difficult to get to.The cord should have been in the back and the outlets in the front, IMO or at least not have the top come out so far past the back of the table. I will keep it but they need to come up with a better design.

I recently purchased the LIDYUK End Table with Charging Station, intrigued by its innovative design featuring a flip top and built-in USB ports and outlets. While the table itself is functional and stylish, there's one notable downside that hindered my overall experience: the instructions.The design of the LIDYUK End Table is sleek and modern, making it a stylish addition to any living room or bedroom. The flip top feature is a convenient addition, providing extra storage space for books, remotes, or other small items. The built-in USB ports and outlets offer added functionality, allowing for easy charging of devices without the need for additional adapters.Unfortunately, the assembly process was marred by the lackluster instructions provided with the table. The diagrams were unclear, and the written instructions were vague at best. Assembling the table became a frustrating and time-consuming task, requiring trial and error to decipher the correct steps. While I eventually managed to assemble the table, the poor instructions significantly detracted from the overall user experience.Once assembled, the LIDYUK End Table feels sturdy and well-made. The materials used are of decent quality, and the table appears to be durable enough to withstand regular use. The flip top mechanism operates smoothly, and the USB ports and outlets function as expected, providing reliable charging capabilities.The LIDYUK End Table with Charging Station offers a blend of style and functionality with its innovative design and built-in charging capabilities. However, the assembly process was hindered by the inadequate instructions provided with the table. If you're willing to overlook this flaw and appreciate the table's features, it may still be worth considering. Just be prepared for a potentially frustrating assembly experience.

Looks nice. Easy to put together. No issues.

Pequeña pero muy util

L'article a été facile à monter et il répond très bien à mon besoin

Nice table but darker than picture.

I received this side table when expected. I found it easy to put together. It looks nice and is strong enough for my use.