Mountright Mobile Trolley Display Cart, Tall TV Stand With Bracket and Castors (wheels) With Adjustable Shelves, For 27 up to 65 Inch LED, LCD & Plasma Screens

Perfect for our needs as a stand for screen used for training etc that couldnt be walk mounted

Bought this for a Samsung MU6400 40" TV, if you have similar model you may find it better to have the power cable connected before mounting the tv, as on this model the power connector was directly behind the vesa horizontal panel and I had to unattach again to get it secured into back of tv.You may also need an extra long screwdriver for the two upside down screws that are the last things you tighten once your tv is mounted to the stand, as on my 40" TV 400x400 vesa mount, they were flush with the poles and I had to go and buy a 20cm long screwdriver :(I also had to go buy M8 45mm bolts for this tv as the bolts supplied with the mount were too short.All the other tools, bolts and screws needed were included.A lot of comments state that the instructions are next to useless, Im not very good at these things, but I have to say I had no real issues following them, so maybe they have been changed.Thats said a few things that could improve the product.1. The instructions list each part with a letter, it would be helpful if the actual packaging, that each part is in, was lettered too. Especially the screws, bolts and washers.2. In my instructions diagram 7 shows the vertical vesa mounts with the circle holes at the bottom (exactly like they are in picture on Amazon), diagram 8 shows them the other way round!3. The poles would be a better fit if they had a flat side to them, allowing the poles to slot in lined up for the shelf properly, rather than having to turn the whole thing upside down unscrew the bolts, adjust the pole, tight the bolt, turn the whole thing upright again and see if they are aligned now,The rubber washers for attaching the mount to the poles fell apart as soon as the bolts were tighten.All in I cant give in more than 3 stars, it seems sturdy enough and looks fine, but the things mentioned above are a real pain during assembly.

The product got to me within the estimated delivery date. Initially, three out of the wheels entered the base, I tried to ensure that the forth wheel would enter by trying it within a different hole and swapping it.I contacted the seller, who responded within one day. He came across courteously. He advised grease or lubricant would help.At the third attempt the forth wheel went in after I left it for a while.To fit the rest of the TV mouth, it took four men to assembly this TV display. It was time consuming, for the section of items such as DVD, the screw was challenging to put in. It was manageable. It's challenging to fit, but this TV MountRight Black All Steel Trolley TV Display Stand With Bracket and Castors (wheels) For 32 up to 60 Inch LED is value for money.

An excellent product that is now being used to hold the screen and computer for my Zwift setup in the garage.Bought this to hold the screen and computer for my Zwift setup.Product itself is solidly made from steel throughout. Comes with clear and understandable instructions for assembly, although it does lose one star as not all the holes line up exactly unless you leave tightening the bolts until all have been inserted finger tight so you have some room to wiggle things to get them to line up.Only thing missing is a tilt mechanism for the screen to allow an upwards or downwards tilt once attached but otherwise very happy with it and wont stop me using it.Customer service from the seller is excellent, See my separate review for them.

Very good product for the price paid. Delivery was as advised. Packaging was good but not brilliant. The banding had cut through the packaging quite a bit, but didn't affect the contents.The top tray - to accommodate DVD or Camera etc...isn't brilliant quality. We bought two stands and both of these components were twisted.It needs a tool to be able to tighten the wheel assemblies to the frame. There's isn't one and you have to reply on some clever hand movements to manage it.The tools supplied are relatively poor quality but do the job. I suggest a philips screwdriver and adjustable spanner would be useful.All that said, the actual finish is very good, the quality of the main components very good, and they look super with the screens mounted.Portability is easy and confident.Just one star down for the niggles.

Very good quality . Looks very nice and mobile with wheels which have brakes on .Only issue I had instructions could have been better and needs improving . The last instruction was very difficult to understand and I could understand why customers would want to return the product .

Excellent product for the price and goes nicely with my Samsung 2020 50" TU7100 Crystal UHD 4K HDR Smart TV it would be nice if I could get an extra shelf for this stand so that I can use it with a sound bar and a gaming console I was a little concerned with some questions on here with the bolts for the Samsung TV but after assembly everything and fitting everything it was simply perfect for everything.?

Easy to follow instructions and assemble together, but not used it yet. I brought this in advance for my future buy of the LG C1 48” ( waiting for Black Friday ;) as I didn’t want the TV to take up desk space.