2 Pieces 1/8" Thick (3mm) Acrylic Sheets,Clear Cast Plexiglass 12” x 16” with Protective Paper for Signs DIY Display Projects,Craft,Photo Frames

No more braking glass and this product is very strong and clear.

Perfect. Thickness is correct for a frame. The plexiglass was protected with a film on both sides AND then wrapped in a protective bag.

Worked perfect for my project. Liked the fact that both sides were protected with a layer if film.

Glad they come with protective wrap on 'em cuz some of the pieces came with scratches already on the plastic, peeled that back and the acrylic seems fine underneath.From the item page they don't appear to recommend using a knife on these, but they're only 1/8", I cut them in half with a razor blade and they snapped apart with relative ease after scoring them and making several passes on each side

This is exactly what I needed to put on some stickers to display. It's manageable, and not heavy, as glass would be.

It's pretty thin, and it's acrylic. What that means is that if you try to use it as an aquarium lid, it will sag.Ordered 2 pieces and I got it at about 10 bucks/piece. The dimensions are quite large, an appropriate size for a 10gal fish tank lid when cut down. However, it sags quite badly. I should have sprung for a sheet that was polycarbonate and maybe 1/4" thick, which is a decent bit pricier but has much less of a chance of sagging.Use the right material for a project. This would probably work fine for a picture frame cover, or something along those lines. If it's vertical and supported on all edges, it probably won't warp or sag much.

These hold my large (9x12) gel plates perfectly! Just thick enough to not bend or warp. I sanded the edges/corners before use.

Very impressed. I got the 1/8 in thick sheets. Both sides were covered with a protective film that was easy-peasy to remove. Thy were also packaged thick protectors clamped onto all 4 corners to prevent damage. And, as advertised, the edges were smooth. I would definitely buy from them again.