current when power is overrun) Recharge: 0.10-5.00A Minimum step 0.01A (the maximum current is less than the s-upply current when the voltage is above 10V ) Mode setting: DSC-CC: discharge current is constant, it can be used to test the battery capacity DSC-CP discharge power is c onstant, used to simulate constant power equipment CHG-CV: constant current constant voltage recharging, applicable to test lithium and leadacid battery Automatic recharging and discharging: support "automatic recharging - discharge - recharging mode", it can be used to test battery capacity Voltage test: 0.000-4.500V (low pressure gear) accuracy to 0.003V, error ±0.5% 4.50V-30.00V (high presure gear) accuracy to 0.01V, error ± 0.5% Current test: 0.10-20.00A, accuracy to 0.01A, error ± 0.5% Capacity test: 10Ah, the resolution is 0.001Ah 10Ah-100Ah, the resolution is 0.01Ah above 100Ah, the resolution is 0.1Ah Connection: four-wire detection, voltage test and current channel are separate wiring, to ensure measurement accuracy LCD display: voltage, current, capacity, time, power, energy and other test data C-omputer Online: dedicated USB to TTL serial port (Mini USB port, not an ordinary USB cable) c-omputer control, curve plotting, calibration benchmarking, firmware upgrade, cycle recharge/discharge etc Package size: 280 * 240 * 150mm / 11.02 * 9.45 * 5.91in Package weight: Simple configuration: 1200g / 2.65lb Standard configuration: 1800g / 3.97lb Packing List(simple configuration): 1 * Battery Tester 1 * Test Lines OR Packing List(standard configuration): 1 * Battery Tester 1 * Test Lines 1 * USB to TTL Serial Port Line 1 * 19V 4A Power S-upply
Trustpilot
2 months ago
1 week ago