Perlegear Universal Swivel TV Stand for 32–70 inch TVs, Height Adjustable Table Top TV Stand Mount with Tilt, Tempered Glass Base, Holds up to 88 lbs, Max VESA 400x400mm, PGTVS26

Got this for a 65" LCD TV and it's a fantastic stand. So nice to be able to swivel the TV and it turns with the lightest touch while staying exactly where you put it.It also looks great, and is so great to be able to put it on furniture that has a small footprint, rather than something that can accommodate the very wide stance that TV feet have today.The stand is also very sturdy and the locks are handy to lock it in place on the frame. Plus if you want to hang it on the wall down the road instead, you can reconfigure it for that purpose.The only issue I had when assembling, is the short 4 screws supplied to attach the plate to the top of the stand. The plate has a bracket that is made to slide on to the top of the stand (over the holes that have a silver ring). So the screws go through the bracket holes and into the stand holes.Only they weren't long enough to be able to reach the threads in the silver-ringed holes. Because those holes (in the top of the stand) have a short neck before the threads start, and the bracket did not hug the top of the stand close enough... so the distance was too far for the very short screws to catch the threads. If I got one side in, I couldn't get the other... and if I put one screw in on one side, I couldn't get a screw in on the other (even without tightening it down).I could have tried taking the bracket off and bending it in some, but aside form it being very thick steel, I did not feel comfortable having those very short screws securing the very part of the stand that was going to be supporting the entire weight of the TV.So used 4 screws of the same size (but longer) that were VESA screws that also came with the kit, that I did not need for my TV, as mine used one of the larger sets. And the VESA screws were handier anyway because they were phillips heads. They are silver instead of black (the designated screws are black to match the stand mast) but you don't see them anyway and I felt much better using those! And since the stand is hollow, the longer length didn't matter, except it' made it super easy to attach the bracket and much more secure IYAM.On this point, in the manual it says (gist) if you want to tilt it and it's not budging, to slightly loosen two of these screws... another reason longer screws are better. (I don't need tilt but mentioned that because it's relevant here.) You don't want to back out a short screw that's only catching a few threads anyway, and potentially have it fall out... but won't have that concern with the longer screws.So I would buy it again in a second (but would personally do the VESA screw swap regardless). But did not take a star off because the stand is so very nice and the screws I needed were included, even if not intended for that purpose. And maybe most brackets hug the mast better so the short screws might work for most people and they won't know the difference.

i bought two of these, one for a 55 inch tv and another for a 65 inch tv, i will say the stand is pretty heavy, when attatched to a big tv, not a bad thing, it provides more stability, but obviously make sure you are placing it on something sturdy. i love that you can adjust the tilt, height, and you can turn it left and right. i suggest setting it up on a bed or mattress or something so you have plenty of room to adjust things, since it's not the easiest process. but once it is adjusted properly it pays off entirely. you will need a second person if possible unless you're extremely strong ( at least for my 65 inch tv, i still did both my tvs by myself but it was not an easy feat at all). all in all i just highly recommend the product if you need what it provides, i can't really complain about anything.

This worked out so well to use my existing TV stand. That was not wide enough to support a bigger TV. This allowed me to mount a bigger TV onto this stand and still use my existing TV stand that was not quite wide enough so that I can be able to watch TV in my living room without any issue. All the necessary hardware is included to mount on different types of TVs, great value or the money since it saved me buying a brand new stand and it was super easy to assemble. Very sturdy materials. Not worried about it falling apart

Good product, but I would like it to have a larger, taller stand, or for it to be sold separately, to increase the height between the base and the stand behind the TV.

I recently purchased the Perlegear TV Stand from Amazon, and overall, I'm satisfied with the product's quality and design. The delivery was prompt, which I appreciated.However, upon opening the package, I noticed the glass base had some scratches. While it's purely cosmetic and doesn't affect the stand's functionality, it was disappointing to see.Given the issue, I'd recommend buyers carefully inspecting the product upon delivery. Despite this, the TV stand itself seems sturdy and well-made. Hopefully, future shipments will have better packaging or quality control.

It looks nice and it holds my 65 in TV just fine. You won't need to drill holes in your walls with this!The swivel feature is great for accessing the HDMI ports when you add a new device or swap one out.It is much sturdier than the feet that the TV manufacturers provide!You may want to consider attaching it to the top of some furniture if you have young kids around your TV frequently.You will probably have to use the tempered glass as a template and cut some wood/plywood to size if you think that is needed.It looks very nice the way it is though, I would definitely buy another one!

Fairly easy to put together. A very sturdy stand. A lot of hardware was included, but unfortunately the large diameter bolts included were too long. I moved a wall mounted TV from the family room to this stand into the bedroom. I was able to reuse the bolts from the wall mount to use in the stand.

It arrived in a very small box that I was doubtful had everything. But opening it I see it's just expertly packaged to minimize space. Assembly went very easy with clear instructions. All the pieces fit perfectly together and did not need to fight them at all. All the parts and tools are individually wrapped which is helpful. They also included adaptors and screws for a large variety of TV's. I have a Hisense 50R6E1 and the included screws were a bit too long, but they also included washers to get them to the proper depth.Mounting the TV was super easy and once I got the locks on it feels very sturdy. I have been able to rotate the TV multiple times and never worried about it. This is a great stand and would definitely recommend it!