ARCTIC MX-6 (8 g) - Ultimate Performance Thermal Paste for CPU, consoles, graphics cards, laptops, very high thermal conductivity, long durability, non-conductive, non-capacitive

Have used this paste for many years now and never had a problem with it keeps temps under controlled easy enough to spread can be a little more on the sticky side but with the right spreader not really a issue would still but again as the performance to price point is very good

For more years than I'd like to admit, I've used MX-4 on all PC builds. When I saw that MX-6 was available, I thought it would just be a tiny improvement over MX-4. I honestly wasn't expecting it to perform so much better, especially at the price! Literally just changing from MX-4 to MX-6 helped turn an ageing laptop from being a permanently noisy beast into a mostly quiet one and has allowed desktop CPUs to boost higher at the same temperature maximum. Whilst it is a little trickier to apply than MX-4, the solution is very simple: just put a decent blob of it on both surfaces (the CPU or GPU and the heatsink) then push together. I've not need to worry about spreading it out like I used to, and hopefully anyone reading this will know that it's a myth that you can apply too much thermal interface material. (People used to try to commonly use the bare minimum of TIM, but this myth has long been busted through multiple tests, showing no real world difference.) If you need some new thermal paste for regular use, this is what you want.

It's one of the best thermal pastes out there. It's a bit hard to spread because of it's viscosity but performs amazingly well because of that.

High quality thermal paste and great value, easy to use and great cooling performance. Can fully recommend. 8g tube suitable for multiple uses.

Whilst there is a performance boost in terms of thermals, but it's quite difficult to spread, which makes sense compared to mx4.However cost even though is a bit higher might be negligible to someone who does need that 3-4 degrees of improvement. Although I've only seen this in some pretty specific environments.It's great, but I wouldn't say it's much different from mx4.

Purchased as i was building a couple mid/high end pc's. Great thermal paste at a good price. There are alightly better performing pastes BUT they also cost doubke the price. Definitely would use again!

I've been an avid user of Arctic thermal paste ever since the silver days and as expected this worked exactly as expected.I have used this on several systems over the past 3 years and so far I have had zero issues, each system where MX6 was used to replace the stock thermal paste saw a temperature drop of around 6c (Although this is normally because the manufacturer paste was nasty)I have used the paste on direct die installations such as GPUs and the Intel CPUs inside the MS-01 and I have also used it on various laptop CPUs and desktop CPUs without any major issue of leakout or drying/crackingI'm sure there are better pastes on the market and for a long term installation such as servers or GPUs I would recommend PTM 7950s but for the price I don't think this is a bad paste and it is easy enough to apply

ARCTIC MX-6 (8g) - Ultimate Performance CPU cooler Paste. This is the very latest improved thermal paste available to date. It will discharge at least four i9 size cpu amounts of paste and it has four widows incoporated into the tube showing how many doses you have left and how many you have used. A replaceable screw in plug is fitted to keep the paste fresh over time. Outstanding Product.