Wyze AX3000 Dual-Band Wi-Fi 6 Mesh Router System, Covers up to 3000 Sq. Ft, 100+ Devices, Replaces Router and Extender, Supports Wired Backhaul, 2x 1 Gbps Ports per router - 2 Pack

I gave a long winded detailed review below, but for those that just want it short & simple: Wyze Mesh Pro 6E (2 pack) exceeded every expectation I had, was extremely easy to setup, it works very well & I am beyond happy!As a former Network Engineer I've been through countless numbers of Router models & manufacturers. I already had a Wi-Fi 6E router, the problem I had was the amount of devices being used, which was causing random slowdowns and/or buffering, minor issues with channel crosstalk from neighbors Wi-Fi & very minor signal strength issues in one area of the house. The Wi-Fi 6E router I already had, did support Mesh Networking, but to add another unit was near $250-300.00USD! I happened upon this Wyze Mesh Pro Wi-Fi 6E (2) Pack on sale for Cyber Monday. The price was very reasonable & it had very good ratings. The package arrived yesterday & within less than 20 minutes if that, the old router was removed, the Wyze Mesh Pro #1 & #2 were both installed & working great! Now 20 mins might sound like a long time, so allow me to layout the setup process. Unboxed, unplugged & removed old router, rebooted modem, connected Wyze Mesh Pro #1 & using the Wyze smartphone app I simply followed the prompts & answered the questions (the questions are not overly technical or confusing at all), when I got to the final step I had 2 options 1) Add Another Mesh? or 2) Finished. I still had Wyze Mesh Pro #2 to setup, so I chose "Add Another Mesh?". The app prompted me to take the next box to the area it was to be placed & plug it into power. After it booted up the app again asked the same questions as before & then I ended up on the same last screen & I chose "Finished". The app then synced the mesh network, rebooted itself, asked if I wanted to get the latest firmware & I chose "yes" so it downloaded the new firmware, then updated Wyze Mesh Pro #1, then Wyze Mesh Pro #2 & rebooted itself again. After that everything worked like it always had, only considerably better! Now there are no slowdowns and/or buffering anywhere, the mesh network automatically distributes the device load based on distance to the nearest box & the amount of devices already in use on that box. There are absolutely zero signal issues of any kind! It will automatically adjust the 3 channels to the most optimal channels available to avoid interference etc. Lastly, I have 1GB (1,000Mbps) Internet, with the old router I usually got around 800-850Mbps & that would drop the farther away from the router you went, but I could get 980Mbps standing next to the router. With the new Wyze Mesh Pro I'm getting 1,150-1,275Mbps regardless of where I am in the house! That's with just (2) of the Mesh Pro boxes, the system supports up to (10).

These Wyze mesh routers really do work. I’m currently running 12 Wyze cams around all of my property and house. Always plagued by cameras loosing connection. I installed one in the back of my house and one in the front with the actual Internet modem in the middle of the house. A lot of work running an ethernet wire to the modem from both mesh routers but well worth it. It’s been close to two years and really no issues so far. Connectivity issues with any camera are now a thing of the past . I highly recommend this product and any Wyze camera

My home is not difficult to cover with WiFi so I can't comment about how well the signal coverage is. But I can tell you how bad the UI is and how difficult it is to manage your network with this router. First, there is a mobile app that allows you to see devices connected to the router. But you can't manage the devices from the mobile app. You have connect to the router with a web browser to manage devices and the router settings. But whatever you can do on the mobile app, you can't do from the browser. And whatever can to on the browser, you can't do in the mobile app. This is SO crazy stupid!While I was away from home for a couple of weeks, there must have been an update because when we returned, the wired devices would not connect, but the wireless devices were connected. As it turns out, the router's IP address had changed. This caused all my static IP devices to not connect. When I tried to change the router's IP address back, it wouldn't work. So I had to change every static IP device (switches, printers, etc.).I'm buying another router that can be managed and throwing this Wyze in the garbage.

Great router , but the best part , it’s so simple to setup and now I have owned it for 7 months and never had 1 problem

If you just want to plug something in, set it up with a mobile app, then forget about it forever this is for you. Very nice so far, no issues, but be warned- very hot. Totally normal but don't put it somewhere confined w/ no airflow- Little to NO admin controls. There's even a firewall/threat detection service that can block CDNs and URLs and no you can't turn it off...So Probably a 5 star purchase if you want to set and forget.Administrator/DevOps types:Probably not for you. You can't really see any logs or metrics. You can't fine tune much other than the radio channels used. If you grew up with hardware from the 2000s and earlier it will be totally alien. For custom preferences and more control look elsewhere.