Glass Polish1.7oz (50ml) Surface Sealant, Easy Clean Coating and Water Repellent for Glass, Plastic, Plexiglas, Metal, Chrome and Car Headlights - GP14111

I highly recommend this stuff for cleaning your headlights. However I strongly recommend you use from 800 to 7000 grit sandpaper to get all the remaining worn Lacquer clear coat and oxidation and scratches off . Start from 800 all the way to 7000. And make sure you wet the sandpaper and us soapy water on the headlight ,using a spray bottle. You need patience and take your time. This took me a whole afternoon's work just for one headlight. Excellent polish to say the least.

The chrome plated polish worked very well.It does not remove scratches but leaves them so that they are hardly noticeable.Very pleased.

Clear instructions and a helpful YouTube video generated confidence to start the process. Carefully following the instructions to complete the task the transformation slowly revealed a stunning back to new appearance. Could not have been happier.

Maybe it looks like littls the 50 ml. But its more than enough for many times to use the glass polish to the headlights. Repel the water immediatly and has durability. I put the glass polish to my healights 2 months ago and still works. I do not know how long will take to the headlights to restore them. I know that after my last headlight restoration 2 months ago and using immediatly the glass polish i am 100% satisfy. The water repel very fast and the headlights has no problem from the sun. The car is all day parked outside.

Had a major problem on my 10 year old vauxhall astra h 1.6 twinbus headlights that I recently purchased. The passenger side were totally deteriorated.So purchased a new unit and replaced, the drivers side were very lightly beginning to show the same effect but did not warrant total replacement. YOU HAVE TO REMOVE THE GRILL AND BUMBER to fit the light unit a pain!!!By proffession I am a dental technician so am used to polishing gold, silver, acrylic and cobalt chrome as I work my local hospital and am registered with the General Dental Council in Britain. That said I used Abraso-starglage asg paste ( very fine diamond paste ) that we use for fine finishing of our metalwork - suplied by Bredent (Dental Company) but Halfords have similar. I applied this carefully by hand until the surface felt like silk and then rinsed off with clean water. I applied the surface sealant with some soft cotton wool makeup pads - supplied by she who must be obeyed!!!Then polished off. Applied another coat let it dry and polished it off. I am staggered by the result amazing... am not going to buy a new unit now have purchased another bottle of this as my family want me to refurb their car lights. You can use this on many items shower cubicles etc. I never or rarely write a review but this has worked for me hope it helps everyone.

leaves a nice finish the headlights on my mx5 were clouding over at the top and dirty just by using this and something like tcut (i used some liquid chrome polish i had lying around) to actually remove any clouding etc i saved at least £10 over buying a kit for the job .You only need a polish that is abrasive to clean the headlight tcut,chrome polish,autosol etc even normal car polish and this product to finish and seal the headlight , i wouldn't spend money on a kit for the job .used it on the rear lights as well and they look 100% better

Used this to seal plastic headlamp, after about a month it went dull and had to be done again.

I used the 3M headlight restoration kit on my 2015 Mercedes. The kit doesn't include any sealant, so I bought this to finish the job. The 50ml bottle is ideal as you don't require a bigger bottle.Apply the sealant to the surface with a microfibre cloth, let it dry for about 5 minutes and then clean it off. I repeated the process again for full protection, which is recommended. Over the long term, it should prevent the yellowing of the lights returning. This is a high quality product which I would recommend.