Ensenior 13 Inch LED Flush Mount Ceiling Light Fixture 5CCT,Glass Dimmable Ceiling Light,2700K/3000K/3500K/4000K/5000K, Kitchen, Hallway, Bedroom Lights for Ceiling,Brushed Nickel – FCC Listed

These lights are unbelievable! I bought the 10" lights for most of my hallways and the 13" light for the top of my stairs. Perfect fit. They look beautiful. Having the option to change the light color simply by changing the switch setting is just perfect - can customize to each setting / location without having to buy special bulbs by Lumen type. Very easy to install! All at a great price and value for the money. Couldn't be happier.

PROS:o The simplicity of the design lends itself well to almost any decoro The external switch for brightness/color temperature is niceo The glass dome seems as though it will be better long-term than plasticCONS:o None so farWould I recommend this to a friend: YesI can't say that the installation of this fixture was any more or less difficult than the typical ceiling fixture.... well except that I chose the 13" diameter which required me to modify some ceiling trim, but that was not a fault of the light, that was my own goof. That aside, I found this to be a serious improvement over the old incandescent fixture that it replaced. Light output is excellent -- a little TOO excellent at the bluest settings. I dialed it down a couple of settings, and it is quite sufficient for the area (approximately 16' x 20' with a 7' ceiling). Of course, that is a subjective observation, some might want more light.So far I am very pleased with it. Hoping that time proves its longevity, we'll just have to wait and see.

If you are replacing a fixture, this will bolt in easily. Dome is glass on this, very nice. There are 5 settings for light temperature (golden to bright white) and, remarkably, the switch is external so no need to remove dome each time you reset. I installed three. Only issue was machining on one bolt holding dome was overcut (too loose). I wrapped it in teflon tape and it was snug. I expected more than one issue, I was pleasantly surprised.

Great fixture for a small bathroom. Puts out good light.

Very solid light for the price. Very well packaged with good instructions. Glass cover is a nice feature compared to the plastic covers that are commonly supplied with similar fixtures.However:1. The mounting screw holes are about 1/16" too small for the screws. Easily remedied by drilling the mounting holes but this should have been caught during production. It's easiest to drill the holes slightly larger while the fixture is still on the ground. Just be sure to use a drill bit that is only very slightly larger than the screws so that you don't make the holes too large.2. The instructions do not state how to use the connectors. They are single use push-in connectors, so it's important to get the wiring right the first time. Alternatively, cut off the connectors and use wire nuts or Wego connectors instead.3. Not as bright as expected. Box says 2000 lumens, but that's probably with the cover removed. Probably more like 1600 lumens with the cover on. Suitable for a room up to about 10' x 10', maybe 12' x 12' absolute maximum.In spite of these minor issues, this is probably the best value for this style of light that I've found.

This is an attractive light. The glass shade looks much better than plastic. I install for of these lights. Installation can be a challenge depending on the position of the electrical junction box. The supplied screws are about 1 1/2" in length. They works fine if the junction box is close to the ceiling surface. If more than 1/4" below the surface it gets more difficult and beyond about 1/3" inch the provided screws won't work. The easiest approach is to just get two 2" 8x32 machine screws (Philips or combo head, per light) before you even start and if you find the junction box is a recessed a bit use the longer screws rather than those supplied. After connecting the wires (easy push in connectors) put your Phillips screw driver tip and shaft through a mounting hole in the light base to a screw head and then lide up the base over the screw head and twist the base to set it in the mounting slot. I did not install dimmers so have no opinion on that feature. The variable light temperature works as advertised.

We had such a great experience with Ensenior's Retrofit Recessed lights and their customer service. We decided to change out the burning out fluorescent bulb in the laundry room with their hallway light fixture. The install was really easy, although I did cut off their connector type to use the ones I prefer. The design looked and felt solid. The light output once again did not disappoint and we adjusted to the color spectrum (4000k) for that room. The fixture itself looks really nice and my wife prefers this design compared the the older fixture we had. In fact we are currently remodeling our master closet and decided to order two more of these to replace the existing fixtures.

The media could not be loaded. I bought these lights to replace the building grade boob lights that the builder placed in my house. Not a fan of that look so I got these which are super sleek and the light is bright. It was easy to install and anyone can do it.