[3 Pack] CLOUDY BAY Single Gang Electrical Outlet Box,14 Cubic Inch Junction Box,Old Work Box,UL Listed

These are good and do exactly what they say they will. To those who have issues with screw holes, these are intended to be used with 8-25 or 8/32 machine screws. Anything larger is too big and won't work with this box. If using the cheaper outlets or switches, those may be using larger screws but if a name brand like P&S, Eletron, GE, Leviton shouldn't have a problem. The screw joints for the receptacle mounting are not tapped and are cut with the screw threads when first screwing into them so it will have some resistance the first time.

As described

Good enough quality, easy to install. No complaints.

I installed these in a 1926 home with plaster walls. The boxes worked great and held solidly. I had NO issues with the plastic wings breaking—just tighten until snug.Tip: The holes where the outlet screws in are indeed a bit too small, as others have mentioned. This makes it so tight that the screw heads strip out on the outlet screws. To fix this, before installing the boxes, I used a drill bit that was just slightly larger than the factory holes. After doing this, the screws went in just fine and held tight.

Worth using to replace the boxes used when house was built

This electrical box made installing a new outlet so much easier. I didn’t have to worry about finding a stud for mounting. The latching tabs on the back securely gripped the drywall, making installation quick and hassle-free.

Works as described basic function. Good quality and no issues installing.I recommend.

Not the best quality but made it work. It cracked during installation x 2. Would not purchase again