FDW39.4" Lift Top Coffee Table with Hidden Compartment and Storage Shelf Wooden Lift Tabletop for Home Living Room Reception Room Office (Black)

It's a solid coffee table. As far as putting together, we'll I read the reviews and most ppl say it's a bit tough to put together. We'll as long as you don't partake in 420 stuff before you do this lol it's pretty easy to put together. It took me almost 5 hours to put together because I did partake in 420 just b4 I put together wich I don't advise lol. If not for that I would say it would have been together in about 2 hours. Instructions were pretty clear and easy to follow. The only complaint I have is when I open the top part to eat, the top slides out uneven. But it opens, except that uneven stuff I mentioned and closes fine. The uneven stuff don't seem to bother the opening and closing. I would absolutely by this coffee table again. And I love the storage that it has.

For the money, this is a knockout product. It's fairly sturdy, it looks nice, and the functionality is great! My roommate and I have been looking for a coffee table for a while and we are definitely satisfied with our choice!One issue I have with this is that building it was a huge hassle. The directions were not very clear, and the figures were very small regarding the pieces and how the screws were intended to fit together. Also, it isn't technically required to use a power tool to build this but if you don't have a drill, be prepared to get a SERIOUS arm/forearm workout as you will be screwing screws into the wood. The holes are started for you but they are not pre-cut, you will have to drive the screws into un-penetrated wood. Also, the angles at which you need to do this are a but ridiculous. It's possible but VERY BLOODY DIFFICULT.Also, the tool that they provide for this is almost a joke. Like a serious "HAHAHAHA" joke. You would need hurculean strength to construct this coffee table using that little thing.Word to the wise, use a drill, even if it is a cheap one, it will be super helpful.Other than that, this product is a solid "bang-for-your-buck" purchase.

Summary: This is a do-it-yourself assembled table having clear instructions, with all pieces & hardware packages numbered. It was packaged well, with table pieces having no dings, scratches, or dents, as the cosmetic sides face inward in the carton to protect from any damage on the carton. Table pieces are well-made, all fastening hardware supplied, and Allen-wrench with Phillips-head screwdriver at one end is included. You will want to use a powered screwdriver to make the assembly go faster & be easier on your wrists. The finished table looks nice & lid raises & lowers nicely, staying secure in the raised position regardless of weight on it until you push the lid forward to lower it. Cosmetic quality is A-. Overall fit of pieces after assembly: B+. I am pleased with the purchase.-Detail-Materials: Table is made of white subtle wood-grain laminate over composite wood.Supplied Hardware: Pre-packaged screws, screws with capture-posts, capture-clamps, lid bumpers, leg floor-slides, and the two pneumatic assemblies was supplied & satisfactory. My packet of wood screws for the lid-raising pneumatic assembly was missing 2 screws out of 16 needed; it is a minor issue as 7 screws appears to be sufficient per side, though may add my own. Round wood-grained stickers are also supplied to cover the exposed nickel-sized hex-head and capture-clamp screw-heads, but those heads are only visible inside the compartment when the lid is raised or when looking under the table.Pre-made construction: The applied laminate was well done, though at one end of the lid and inside the compartment's bottom there is a slight glue excess along one edge, barely visible. All holes have been fully pre-drilled except for the lid-securing holes, which has pre-drilled starter holes.Do-it-yourself assembly: All table parts are numbered, and picture assembly guide is very good.-Allow 30 minutes for unpacking, separating & organizing the several numbered hardware packages, & for placing the table pieces aside on a carpeted floor/area where you can see the piece numbers (stickers).-If you have a powered screwdriver, this will take about 1 hour and 10 minutes to assemble. Without a powered screwdriver this will probably take 2 hours, & you will be tired.-The pneumatic assembly hardware is the last thing to go on, starting with the lid. Putting the screws in will be awkward under the secured pneumatic rods. I unscrewed one end of the rod-end to get more access, then re-attached it after finishing; since the rod is under a mild compression when installed, it takes a little effort to re-compress it to re-attach it.Operation: The secure top needs to be raised & lowered with reasonable strength of two hands using equal force or one hand in the very middle, otherwise the lid goes off-center & binds-up.

Love, love this table! I don't have a dining room so this works perfectly for me. The small size is awesome! It fits in perfectly with my decor and the lift of the top piece makes it ideal to eat meals in comfort. There is storage space under the top and a lower shelf. What a great design! Then, add the affordability and it's a "10" in my opinion!!! Yay!

If I could give it 0 stars, I would. The worst thing I’ve ever bought from Amazon. Came with missing pieces, chips in the wood, the instructions have almost no words in them, and the hinge on one side is stuck- - so the table is basically unusable at this point. Have to return the whole thing in order to get a refund, which would be fine, except I built the whole thing to find out it doesn’t work. Don’t waste your money. Avoid at all costs!

My table arrived with some damage. Two pieces had chips/scratches. I contacted the company and they offered me a partial refund. The damage wasn't anything major, so I accepted. It's been an excellent table! Sturdy, looks nice, and the hidden compartment is cool.

I wasn’t sure I’d like this because I didn’t think it would be sturdy but it really is! The instructions are easy and I did it alone , it takes you through each section then you finish off with attaching the top, which would deff be easier with a second person to hold it but it’s doable with one person. It’s sturdy and solid and actually a little heavy. Make sure you use two hands to lift the top by the middle of the table .. it’s a little stiff at first but will glide easier with use I’m sure . For $40 I can’t complain at all and it fit perfectly in front of my couch , I used the option to show it in my room before buying and it fit exactly like it showed it would!

Product came damaged. Instructions sucks. It took me 4 hours to build. Not im going to bother returning. I dont recommend this product. Color is nice.