Dulepax RV Awning Fabric Replacement(14'2" Fabric) Heavy Duty 16 oz Vinyl Fabric Awning for Camper, Universal Camper Awning Replacement for All Trailer Awning Brands Grey

EXCELLENT QUALITY MATERIAL!! comes with plastic beading already ready to slide right in, just got this and installed for our 15ft awning. The 14,2 material is perfect. All sewn nicely and did not tear on install. Mind you I've never replaced an awning before and this got caught on the metal edgeswhere the bead threads in many times as I am kind of clumsy and did not rip or tear. Nice and thick. Definitely recommend. Also comes with a new pull cord. We have a sun chaser Awning.

Easy to install and looks amazing!

Muy buenos

Material looks to be good quality. Fits perfect. Comes with pull handle as well.

My Solero manual awning (pull strap, ratcheting type) on my 2013 StarCraft camper ripped a little at the seams when i left it out in strong wind. After searching for a replacement, I chose this one. It may not be OEM quality, but it is close. For the price, it is great. I read another review stating that it was a little better than a harbor freight tarp. That is certainly not the case. Only using my camper 2 to 3 times a year, this is wholly adequate and much better than dealing with a ripped one. If I were an every weekend camper, I _might_ opt for the OEM version, though there is not much difference in my opinion.I could not find specific instructions for replacing the canopy on my type of awning, so this is what we did. Installation will certainly take two people, and can be achieved by fully extending awning as normal, letting it lock into place. Remove set screws on both roller bar side and camper side. Simultaneously push each arm back towards the camper to within a foot or so and securely tie both arms off (there will be resistance due to hydraulic arm). Obviously, the old canopy will hang down since it has not been rolled up on the roller bar. Slide old material out. Spray soapy water on the both edges of the new canopy and carefully slide the new canopy through the roller bar slot and camper side guide, working each end little by little (soapy water is your friend here). Have someone hold the new canopy out straight so that sliding it is easier and you don't tear it on guides. This step is cumbersome due to the weight of the material. Be patient, work slowly- speed will increase once several feet have started in. Then while holding them, untie the arms and slowly extend canopy arms back to extended position. Make sure new canopy is straight and in the right position. Hold strap, release lock, and rollup/extend the canopy several times. Then, put the set screws back in place.

Very nice without any trouble . Installed in a couple hours first time ever doing this job. Would recommend

The replacement fabric is as good or better quality material as the original, that lasted 8 years, before it needed replacing. The old one was easy to remove. The new one was easy to install, till trying to thread it back through the channel on the trailer itself. Took 3 of us to do it without risking ripping the new material. One person gradually pulling, one person feeding, and one holding the roller level on the other end. Of course, this was our first time, and we had no experience except for watching online videos, but after finishing, it was good as if we had bought the replacement from a dealership and had them install it. Saved quite a bit of money doing it ourselves. took us about an hour.

South florida sun exposure here, works great. Great quality. I will order again if necessary