Autobahn88 Heater Silicone Hose Kit, compatible with 1989-1994 Nissan Skyline GTR R32 RB26DETT BNR32 (Black -without Clamp Set)

I'm reviewing this because it appears to be the only kit on the market for rb20det coolant hoses. I figured it was time to replace them all after getting a hole in one of the short pieces under the intake while at the track. This kit also included a the molded air/vacuum lines for the brake booster and idle valves, which was very nice.They are nice thick hoses with 4 layers or reinforcement, so you will need larger diameter clamps.Oddly enough I don't think it came with a small elbow for one of the turbo outlet lines. Its highlighted in the diagram I attached. In the diagram it looks like there were two versions of the turbo water outlet, one that tee's off and needs the extra hose, and one that doesn't. Mine is the one that tee's off and goes to the manifold just above the injectors. I just capped them both off so it didn't bother me much.Overall I'm pleased with the kit, and bought their radiator hoses as well. I'm tired of having old coolant hoses get a hole and ruin my week.

Shipping was much faster than expected. Kit seems to have extra hoses that do not belong to the BNR32. It seems as if the extra hoses also accommodate the BNR33 and 34 skylines. Lastly, one hose seems to be not included. This is the smaller odd hose that branches off the pipe that runs behind the motor and connects to the water/coolant collector under the manifold. It’s a relatively small hose with a 45 degree bend. Other than that, great seller and great product thus far.

The hose kit is amazing. I love the hoses they are quality and they are great but DO NOT get the clamps save your self some money. All but 2 of the clamps failed under load and they were completely useless so I had to get my own clamps.

Couple things here;First, this kit doesnt include the hosing for ALL heater hoses, in fact it leaves out the main two: the radiator hoses. There are other ancillary hoses that are missed as well. All in it includes 85% of the engine bay for heater hoses. There are no vacuum hoses included.Second, the clamps that come with this kit are poorly made and dont fit well...especially the screw style clamps.Third, most of these hoses are cut to fit, meaning they come longer than needed and you have to cut them to fit.Other than the obvious three, it must be mentioned that you CANNOT use the stock clamps with this kit, the hoses are too thick...I'm sure there are better kits out there, check before you spend a lot of $$.

The hoses fit perfect on my R32 GTS-4. The kit even coming with some of the crankcase hoses.

My fiance is pleased

Seems like a decent product, photo shows 4 hoses. Package arrived with 3. Typical bait and switch imo. Unhappy with that part of product. The three shipped hoses seem well built and quality