LutronDiva LED+ Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs, 150W/Single-Pole or 3-Way, DVCL-153P-IV, Ivory

This product was just what I needed to convert two lights, one LED, and one incandescent light, to dimmers. One of the dimmers was lacking the wire nuts and screws necessary to complete the conversion. Luckily, I have a lot of wire nuts so it was not a problem for me. That particular package was also quite beat up. I'd guess that the switch was probably a return from another customer. In any event, the switches worked well and match my existing Lutron switches so all is well. Some quality control on items going out the door is probably in order.

Gotta have to keep new led dimmable bbs from flickering, it’s not the bulb-it’s your switch. Worked perfectly. Will hang on to old switch for other location in case those break.

I have these dimmers in areas throughout my home, I really like it. Easy to set up and use.

This dimmer switch main package and description states it dims LED bulbs but once I installed the switch I found that it does not dim G4 LED bulbs. Wasted a lot of time and full price of the switch. The instructions inside the package states it only works with screw in type LED bulbs. That information should have been on the product description as it is very important. Very disappointed with this product and the poor description that does not indicate that it only works with certain types of dimmable LED bulbs.

Excellent value and works perfectly - what more could one ask for?

We have an on demand water heater and when it kicks on it causes some of our LED bulbs to flicker. You can manage not paying attention to it in some locations but this is installed in a half bath. When you use hot water in the sink the lights would flicker. The old switch was supposed to be LED compatible but the water heater caused noise on the power line and the dimmer switch couldn’t handle it. This switch solved the problem. I have it paired with a Cooper SMD6XWH LED light and my on demand water heater is a ECO Smart ECO27. Hope this helps someone else with a similar issue.

Does what it is supposed to do, but I really wish I'd known there would be wires already attached to the back. I've not done a dimmer before, so maybe that's normal, but it made getting everything into the already crammed light switch box really challenging.

Works great with LED bulbs. Stylish switch that fits and works perfectly.

Pros:-Does the job.Cons:-Razor-thin dimming slider is hard to grasp, unpleasant to the touch.-Switches sound and feel hollow when flicked. Cheap feeling.-Fins are thin. Screws heads can easily warp and go past the screw holes if you overdrive them. I had to insert washers as backing.Overall: Not enough quality for the price.Recommendation: I went with a Pass & Seymour Radiant dimmer instead. Has none of the cons above.

This product is easy to install. It works really nice and looks pretty good as well.

This dimmer was easy to install and works well, with no buzzing of the dimmer or the lights. It can be used to replace a single switch or two-switch system. A bright/dim controller allows adjustment of the lights at their minimum. Even at minimum setting the switch powers up the lights. This dimmer can be installed with a regular faceplate and two screws, but comes with a screwless faceplate. This has to be removed for installation. This is fairly simple to do before mounting as you can get to the back of the plate to release the hooks. But once the plate is snapped on to the dimmer, it seems trickier to remove, with the possibility of breakage. The bright/dim controller is only accessible with the faceplate off. I'd like to check the bright/dim controller settings on the Lutron dimmers that came with the house, but have chickened out for fear of breaking the plate.

This is my 5th dimmer switch and they all work great!

Very neat and easy to install.