Kuryakyn 8956 Tour-Pak Trunk Luggage/Storage Rack Accessory: Relocator Kit for 2014-19 Harley-Davidson Motorcycles, Black

2011 Road glide. It worked great. It gave my wife two more inches of seat space.

The media could not be loaded. This was an easy install. I read the instructions and watched some videos of how to install it. First take everything out of the tour pack. Then remove the seat in order to use the seat area to lay the trunk down. I put some towels on the seat frame to keep from marring the tour pack. Then I unbolted the tour pack from inside the trunk. For some reason there were only 5 out of the six nuts on, but no matter. Once the pack was unbolted, I flipped it over on the the seat frame. This way, you do not need to remove any wire connections. Remove the four nuts which hold the pack frame to the tour pack and lady the bolts aside. Next bolt the extenders on the right and left side, they are marked as such and reuse the four bolts you set aside. Now bolt the pack frame to the extenders. I did purchase four #8 hardened 1/4 x 20 x 1 inch bolts, because I had heard they ones that come with the set break easy. I bolted the pack frame on the three inch hole. Like someone said, no since of taking it back off and on again to readjust the pack. Once this was all bolted back together, I had my wife help me set the tour pack back on the trunk, we put the nuts on the 5 bolts and it was done. I did install the extended pad too to cover the wires and keep my wife's body comfy. She hasn't ridden on it yet since we put the relocaters on, but I suspect she will enjoy the ride better.

Product works exactly as advertised, moving my wife back three inches (as my seat moved me 2 inches back to accommodate my long legs. I've used the same mounts on both a factory hard mount, and the quick-disconnect tour pack mounts. The bolts provided are the correct length for the factory "permanent" tour pack mount (which has a 1/4" thick raised mounting boss). Be prepared to purchase some shorter bolts if you're using a quick-disconnect mounting system, as the mounting plate is much thinner, and don't forget to use a thread locker.

The brackets are a breeze to install and do exactly what they say. They pushed my Tour Pak back 3 inches giving my wife and I some much needed room. The only issue I have is they are visible and can see the Tour Pak sits up about 1” higher, but the extra room is worth it.

Install was fairly straightforward with a second set of hands. Simply learned pack forward and installed plates while wife held pack. Lay back down and install bolts in desired position.Definitely gives the wife more room and I can sit back without laying all over her.

Absolutely great product! Like everyone else has said it's well worth the price for the extra room. My only complaint is the junk bolts! It says to torque to 60-72lbs I didn't even make it to 30lbs! Go buy some Grade 8 hardened 1/4x20x1 bolts and you'll be good to go!

This is not the vendors fault, but unless i did something wrong the directions were not correct for a trike. But i figured it out, plus the bolts that hold the blocks to the tour pak were to long and i had to make a run to the hardware store. But once installed, it works great. I wanted to wait to get the filler pak, but it was needed and is on order.

A little less expensive than the bike dealer and received in a couple days. Easy to install. Gave us the extra room needed between my husband and I so that he could move back further and get his private parts off the fuel tank!