eSUN 405nm LCD 3D Printer Rapid Resin UV Curing Resin ABS-Like Rapid Resin Hard Tough Resin High Impact High Tough Photopolymer Resin for Photon UV Curing LCD 3D Printer, 1000g Blue

Description

eSUN LCD UV 405nm Rapid Resin Photopolymer Hard Tough Resin for Photon LCD 3D Printer 【What is Rapid Resin?】 Photopolymer resin is a kind of polymer that changes its physical properties when introduced to light. In the case of 3D printing, these are typically liquid plastic resins that harden when exposed to a light source. 【Specification of Rapid Resin:】 ● Material: Resin Monomer & Photo Initiator ● Available Color: Blue 【Resin Parameter:】 ● Wavelength: 395-405 nm ● Density: 1.10-1.15 g/cm³ ● Viscosity (25°C): 200-300 mPas ● Flexural Modulus: 1300-1400 Mpa ● Flexural Strength: 70-80 Mpa ● Tensile Strength: 55-60 Mpa ● Elongation at Break: 30-50% ● Shore Hardness: 81D ● IZOD Impact Strength: 67-100 J/m 【Advantages of Resin:】 ● Hardness 81D. High Toughness. Wear Resistance. ● High Impact Strength. Resistance to Fall. ● High Mechanical Properties. Good Stability. ● Fast Curing. Excellent Fluidity. High Successful Rate. ● Compatible with Most LCD 3D Printers. 【How to Use:】 ● 1. Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight. ● 2. Wear gloves before use to avoid direct contact with the skin and keep the room ventilated. ● 3. Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention. ● 4. Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more).