LED Pod Lights Driving Fog Lights Amber/Yellow White Dual Color 2Pcs 40W 3Inch LED Driving Offroad Lights Work Auxiliary Lights Ditch Lights Fit for Motorcycle Truck Car SUV ATV Boat Pickups Tractor

This is just a preliminary review, I will edit as they age. I just installed these in a custom bumper and WOW! If you are looking for fog lights This is the perfect setup.Pros: SUPER brightPerfect flat spread patternSeparate leads for amber and white, no power cycling to change modesGood mount systemEasy to adjustWhite pattern projects higher than amberCons: I didn’t buy them sooner.They get hotMust be mounted level for correct beam patternI don’t believe the amber and white will fire at the same time, the white overrides the amber, not that you would want to run both.The lights have 3 wires, red white and black. The black is ground, red is for amber and white is for white. I connected the amber (red wire) to the factory fog light leads and spliced the white into my high beam leads. So I can turn the amber on and off with the fog light switch and the white comes on with my high beams. Most vehicles’ factory fog lights turn off when high beams are engaged so this works out perfect.The optics are probably the best thing about these, both beams spread horizontally kind of like a flood light but keeps the distance capability of a spot light, no wasted light in the high and low areas, it all goes where you need it. The amber beam projects lower than the white, which is what you want for fog. The idea of the amber fog lights is to keep the light under the fog and reduce the glare you get from white light, these do that perfectly. The white pattern is significantly higher than the amber, so it is really reaching out there and boy can you see.This kind of setup I would expect on some high end expensive lights, I was pleasantly surprised. I hope they last; please please please last! I don’t know that I could find a more perfect light for my purpose.Thank you for an excellent product!

Muy buenas luces, fin ionan excelente en neblina

I replaced the stock driving lights on the in law's F350 bumper with these. They were already extremely close to the size of the ones that were on the 2004 Ford and I even re-used the old light brackets to put these back in the bumper. The original were designed as 55w so the original wiring was sufficient to make these work, but with the dual color control I had to toss in a 3 way switch to select color: white, amber, both. So far they are working great and the amber appears to have more of down ward angle reflection when observed in dense fog. I would buy again!

I am not going to say this is Diode Dynamics Pro Max status, but it's definitely better than some of the other garbage I've seen, as well as stock fog lights.I run these full time at night. I'm that guy! But, they aren't nearly as bright as some of the other ones on the market and their cut-off is decent, to the point where I don't fear really blinding people. They don't cast light very far, but do provide more light output than the stock headlights of my Ram 2500.The color is more green that amber. I did not wire up the white light, so no review on that. Overall, I'd say these are good for the price but remember that just because you added these doesn't mean you can see better - these illuminate only so far out and increasing brightness right in front of your car/truck impairs your long distance vision. Would I buy again? Eh, no. Would I recommend? Yes if you're cheap like me.

Super bright light, easy hook up into stock fog light wiring. I ran these for about 6 months on the amber setting and one of them had moisture in it from about week 1 and the other didn’t. The one that had the moisture started strobing after about 6 months between white and yellow. Re wired to white and working fine. I got into contact with the seller as they have a 1 year warranty to see about getting a replacement and they were very responsive and stood behind their warranty. About 3 days after I contacted them I had a new set delivered and ready to go on. I may run some sealant around these to make sure no moisture can get in and hope they last longer than 6 months this go around.

Ive been very impressed with this pair of lights. Ive only had them on my truck for a few days, but they have been great so far. I'm running the amber as DRLs and the white with my high beams. I had to make new brackets for my application, but thats not the lights fault. But if they made the brackets just a little taller it would fit alot more applications. They have a nice cut off line so your not blinding people with the amber. But, when you switch to the white the beam is nice and high and throw alot of light out in front. Again, so far a great light for little money, we'll see if the hold up...Well, after about a month of having them installed on my truck they are still really bright lights, but now they are getting some condensation built up inside😪…. I’m sad, I really liked these….

brighter than expected.wire harness is laid out for having the battery in the drivers side rear of the engine compartment. Mine is on the opposite corner. However, the harness to the lights is plenty long enough. So the only wires i had to extend was the + wire to the battery. I just screwed the - wire to the fire wall.the hardest part was getting the harness through the fire wall. but that is not the fault of the product. It would be nice if they has a wireless control. then there would be no fire wall issue.

I love these lights they’re extremely bright. The only negative thing about it that they’re a bit heavy for my bumper and this caused them to bounce up and down. Might have to reinforced them with something. I also recommend you buy a duel switch since this will allow you to turn them yellow or highbeam white. The dual switch I perches on Amazon, is titled “ Nirider Wiring Harness Dual Color, 12V 40A Relay Fuse Dual Switch Wiring Harness Kit for LED Light Bar Fog Lights”