Glarks 30Pcs 2 Pin Way Sealed Gray Male and Female Auto Waterproof Electrical Wire Connector Plug 22-16AWG Connector for Motorcycle, Scooter, Car, Truck, Boats

The media could not be loaded. It is very frustrating at first. I had to use some small needle nose and straighten several of the terminal open tabs so they would fit into my crimpers. Then once you figure out how to hold the pins and wire while making the actual crimp its so simple a caveman could do it. I use the IWISS SN-28B Crimping Tool for AWG28-18 Dupont Pins. It has a ratcheting action that will allow you to get the pin in the jaws and have the tool ratchet 1 click and it holds the pin giving you a free hand to put the wire in. Once lined up the ratchet action is so easy to crimp the wire. Just compress one complete time and it makes a perfect crimp. The crimps are flawless every time. My project was a 12 wire digital dash panel for my 1966 C10. This made installation literally plug and play. I didn't want to be making connections under the dash so installing this plug literally make it a simple plug in, once I ran the sending unit wires to the corresponding terminals of the plug. This has never been so easy, so professional looking, and so weather resistant.

Work well. Pins go in the longer connector and sockets go in the shorter connector, opposite of what the picture showed

Everything assembled easily once i figured out which way the locking wedge weng and which connectors went into which plugs, instructions would have saved me a lot of time

Easy to use and a great value

Perfect for what I needed

DIY guy here with 35 years if experience. I can assure that the 3 pin connector fails big on the design. No matter how you assamble it (despite no manuals or what can you see in a video), it is IMPOSSIBLE to put all the parts together. I used the long connector with the female terminal and the green crimper and the short connector with the male terminal and the orange crimper and viceversa, it is impossible connect each other. No matter what combination you use, IT WILL NOT CONNECT BETWEEN BOTH TERMINALS IF YOU USE THE ORANGE CRIMPER. Not recommended! At least, I don't recommend the 3 pin connectors.

Great quality connector kit, and a great value given how many connectors come in the kit. It seems some reviewers don't realize the going rate for a typical connector pair is around half of what this whole kit costs. You get multiple pairs in this kit, so you can connect up a ton of wires for a low price.You need a reasonable connector pin crimper to use this item BTW. Some reviewers also seem a bit unfamiliar with how you build up an electrical connector from scratch, and the basic tools needed.

I wish it came with some instructions, however, i did fine a video that helped.Im using them in an engine bay of a vehicle of mine to change old and crusted conections. So far after watching the video and pre assembling with 14g and 16 g wire they are awesome! And there is no doubt in my mind that they will prevent your average to above average water exposure.I will be buying more for more conections on vehicles.If the company reads this message please include a disassembly tool and a set of instructions. Id ve more than happy to pay the added cost to do so.