WORKSHOP Wet/Dry Vacs Shop Vacuum Accessories WS25022A Extra Long Hose Attachment, 2-1/2-inch x 20-feet Locking Hose for Wet Dry Shop Vacuum Cleaners

Works well with my Bauer 14 gallon shop vac from Harbo Freight. The extra length is really handy. Seems to be good build quality, and coils easily. Not super stiff but the hose is a plastic type material. Locks right on to the exhaust or intake port on the blower for easy installation.

Not sure why I wasn't using a really long hose to begin with! This is really good, has a couple different adapters for a different vacuums. Feels rugged.

This has a nice selection of attachment adapters to fit a variety of wet/dry vacuums. It secures good to my Shop-Vac. The hose is long enough so I do not have to lug the vacuum around to get to the areas that need attention.

I have a large Ridgid wet/dry vac that has a 2-1/2 inch port for the hose attachment. I purchased this extra long hose specifically to use with that vacuum to remove a lint clog in our dryer venting duct that could not be cleared with a lint brush. I needed a long hose to be able to get to the clog. This hose, at first glance looks like the hose for my wet/dry vac except longer. It has a tapered end on one end to fit attachments, and the other end is just open hose. This set comes with 3 different sized adapters to fit that non-tapered end so the hose can be customized to differing sized vacuum ports. The adapters all have a slightly tapered end designed to fit in the hose and stay in place. It is a snug fit but they do go on if you work at it.The main problem with this hose is the largest adapter, advertised to fit a standard 2-1/2 inch port, does NOT fit that size port. I measured the adapter, and its interior diameter is 2-1/4 inches and exterior diameter is 2-5/8 inches. The good news is the tapered end of my existing vacuum hose fits into that adapter just fine. So, in essence, this hose cannot replace my existing vacuum hose but does function as a 20 foot extension. So those who have a vacuum with a 2-1/2 inch port are wasting money paying for a coupler if your intention is to extend your current hose. You will be disappointed, however, if your intention is to replace your existing hose for a port that size.In summary, this 20 foot hose makes for a good extension for an existing hose that plugs into a 2-1/2 inch port on a vacuum. The included adapter is not sized correctly to use this hose to fit a 2-1/2 inch port as a replacement hose. The other adapters included may fit other brands of vacuums and two other sized ports, so depending upon your vacuum and its port size, this hose may fit other vacuums as a replacement hose. If you can get this hose fit to your wet/vac vacuum it is a great way to clean your dryer ducting, improve dryer efficiency, and reduce your risk from a fire in a dryer duct.I try to write informative product reviews. If you have found my review to be helpful, please let me know by clicking on the “Helpful” link.

Works great and is compatible with the cheap Rigid vac from Home Depot. Be mindful and try not force the hose to straighten out from a loop because you’ll kink it. Difficult to use in tight car spaces unless you have a small fitting but works great for seats and trunk.

This hose is great for those long reaches. I needed to vacuum some areas that were too high for my original hose and I didn't want to have to carry my shop vac with me on a step stool to reach where I needed to. 20 feet is more than enough for what I needed.

This fit my old Rigid Shop Vac perfect. Works fine.

Ease of installation:Product fit my husbands 16 gallon ridgid shop vac perfectly, snapped together like it came with the shop vac and was able to get our clogged gutters cleaned out with ease in less than two hours and no mess to clean up around the house from blowing the gutters out with a leaf blower! Very happy with this purchase and would highly recommend it to anyone needing a longer hose attachment! Just be sure to connect the attachment with the one side that is smooth and the other side that is ribbed and has the black release button onto the hose to connect to the shop vac. Not the one that has the red release button on it. Those little buggers are hard to get back off the hose once it’s connected, which is a plus as well!