🚀 Elevate Your Adventure with Dynofit!
The Dynofit 3" Front Leveling Lift Kit is designed for 2014-2022 Ram 2500 and 2013-2022 Ram 3500 4WD models. This heavy-duty steel lift kit enhances ground clearance, allowing for larger tires and improved off-road performance. With easy installation and a 2-year warranty, it's the perfect upgrade for any truck enthusiast.
A**R
Good quality instructions suck! 2021 Dodge 2500 Cummins
The leveling kit quality is fine, and once you figure out how to install it, it’s pretty easy, but the instructions are not clear at all!On the passenger side, you use the flag bolt through center of the spacer and the additional bolt to secure it, then put the spring back together. On the driver side, atleast on the 2021, you can’t use the flag bolt because the abs module is there, so you have to drill another hole and secure it with another bolt in the back (not supplied and make sure you don’t drill into the module).If you’re only securing with the one bolt because the instructions aren’t very good and don’t show the flag bolt, I would say you probably have a safety issue. We didn’t feel comfortable and did more research and found additional instructions from other kits. Once we got that figured out, the install took less than 30 minutes. If you have all your information this can easily be done in under an hour. Instructions seriously need to be redone… but for under $100 I guess you really can’t complain.Once installed the truck rode great, no issues at all even at highway speeds but had it aligned right away.
C**.
Quality of parts were good
The instructions and pictures could be a little larger. I did struggle reading the small print and definitely struggled with the picture size.
B**N
Wored as described.
Wored as described. Factory fit with minimal work. Took me about 1 hour to install. You'll need to have your alignment done as it turns your caster/camber off a little and throws the steering off by a few degrees but that's to be expected from any lift or level kit. I used it on a 2016 Ram 3500 HD cab and chassis.
A**N
What are the 1” by 3” pieces of steel with bolts for? Not mentioned in instructions
Instructions flat out suck. I need to know what the bolts are for with the 1” x 3” plates
8**7
3 pulgadas de aumento
Muy bueno y cuesta instalarlo un poco
J**P
Leveling kit
Everything went together fairly easy.
C**G
Horrible instructions
Good quality parts. Horrible instructions. Can read it and can't see the pictures. No info on the 2 - 1"x3" little plates. What are those ?
R**.
Don’t buy this product
I wouldn’t recommend this product. I put it in my dodge ram 2500. For starter they only supply one bolt to mount the puck to the top and the bracket with nut that they want you to put on the top and bolt through the puck doesn’t work on the driver side because of the ABS system is literally right there. So do yourself a favor get it elsewhere or make sure you have 3/8 bolts, washers and locknuts so you can mark where you need to drill a hole and literally bolt the other side up. Also the shock bracket can go on 2 different was which they don’t tell you the proper way and I installed it and had to remove it and install it the other way. What a big waste of time.
Trustpilot
2 days ago
1 month ago