DS18PRO-CFX 2-Way Car Audio Passive Crossover, Great for Tweeters & Mid-Range Speakers - Power Handling Up to 300 Watts (2 Pack)

1,000 % recommend, clear and crisp sound!

very good cross i used them on ds18 pro mid and tweeter

Well made, good quality product. Worked well.

These work great and the ability to reduce the tweeter output by as much as 6db is crucial in building a system where you can hear the sum of the drivers acting as one instead of each individually. The do not add any noise into the system, instead they did add clarity and tone separation making the stereo far more pleasant to listen to. If you have a high end amplifier and speakers, you will likely get a nice result, these will not take cheap speakers or amps and make them sound like expensive high end components. I do note that there is a top review that states there is a ceramic capacitor on this crossover, this is not true.There are resistors that attenuate the tweeter and provide some impedance matching. This is a very common practice and in the case of this crossover, allow for a reduction in how "bright" one driver is over another helping to compensate for instances where the drivers aren't evenly matched. Overall, its a great product.

I dinged these crossovers 1 star only because they are so LARGE that they prevent installation anywhere near almost any speakers... plan on installing these closer to the amplifier and running wires to both components... unless you have a really large space that the speakers will be installed in. I would have like to have seen at least a pack of self-tapping screws included in the right size but then these are 'pro audio' so it's not that uncommon to not see any installation materials. the ability to reduce the tweeter output to -0, -3, -6 db is a feature ALL 2-way crossovers should have. Too many others have +0, +3, +6 instead which doesn't let you compensate for tweeter 'scream' without another piece of equipment... for simpler installs this is a needed and welcome feature. I would have loved to have seen some better capicitors but these should be audio quality and the price point is good.

Grab these because I wanted to change my dash coaxial speakers to a set of component mid and tweets. My DSP only had 8 channels now I was running 10. They work okay but decided to use the high pass crossover that came with my audison tweeters and wire them to my rear coaxial door speakers which for receiving a full range signal from my DSP. Felt like the ds18 added a bit of distortion.

These are ridiculous! I love them.. so loud and clear, must experience them yourselves...

Ordered these to use with my 2 way components. Originally ran them as 3 way, but my new car is not a 3 way set up, so needed new crossovers. Found these at a pretty good price and figured I'd try them out. They installed much like any other crossover. They seemed to be built pretty sturdy. They are a little big for 2 way crossovers but not "overly" large. Terminals tie down ready well and they seem like they'll hold up.