CESS-075-6i Heavy Duty Waterproof RCA Cable, Phono Male to Male (6 in)

Super high quality connectors, perfect sound of course, very flexible silicone insulation. Made in USA and reasonably priced.

I have a boat that has a remote stereo and separate amplifier next to each other, but down in a bilge area. The boat manufacturer used run-of-the-mill tinned RCA cables (i.e. not waterproof, leaving a lot of exposed metal) to connect the two units together. I operate the boat in a marine environment, and even though these cables aren’t directly exposed to water, the surrounding salt air is incredibly corrosive to metal. The manufacturer’s RCA cables corroded within just a few months, virtually welding the connections together. The solid construction of these new cables gives me some confidence that they will hold up better over time. To be on the safe side I used a little dielectric grease and wrapped the connection point on the stereo’s pigtail with silicon tape to provide further protection, so between that and the sturdy looking sleeves that the silicon tape adhered to very well, I am not expecting to have a repeat of the mess I ended up with from the manufacturer’s inexpensive generic patch cables.

Used inside the fairing of my Harley to connect radio to amp. Nice tight connections, seem well made. Time will tell how it holds up to the weather...

Exactamente lo que necesitamos para evitar el reguero de cables detrás de los equipos

I've been accustomed to always paying a bit (or quite a bit) more for better, upgraded audio cables such as with the RCA, USB, and Optical variety. After all, we've been taught to assume that more (price) means better, right? Well, not always.I saw this short pair of WJSTN RCA cables on Amazon for a ridiculous low price. And at first, I was going to ignore them due to this low price. But I figured that I give them a try as I needed a short pair to connect between a DAC and Headamp that were side by side.When it arrived I was stunned (in a most positive way), to see a set of cables that rivaled the looks and build quality of some very expensive versions. So I connected them and the end result was that I heard no audio differences whatsoever between these and my other higher-end audiophile cables. So for me, this came as a very pleasant surprise and I wound up ordering more. So don't let the low price of this short pair of RCA cables dissuade you from considering them. Save your money - get a pair or two - you won't be disappointed. I certainly wasn't...Based on the low price, and based on their high audio performance levels, I'm giving these 5 stars.

The 6 inch cables are very well built and flexible enough that they can easily make a 180 degree uturn to reach nearby components.

I bought the 1-foot version, and these cables actually measure about 16" end-to-end. About 3" longer than the "1-foot" cables they replaced. I'm not sure if there's some standard for whether to measure the whole thing including the connector, or just the cable part, or what, but in this case the full cable is quite a bit longer than advertised. Not the end of the world (and it might even be a bonus in some situations), but when you're working in a small space and trying to avoid a bunch of extra cable, it's kind of annoying.Once nice thing is that the outer part of the connectors is plastic, rather than metal, which I like because it removes the chance of two connectors touching and creating a short or other problem in tight spaces. This is one of the few short RCA cables I've found with non-metal connectors.

These cables are listed at 6 inches long. The cable between the RCA plugs is 6 inches. Overall length is just under 11 inches - see the photos of the cables with the tape measure.There are not many sources I have found for midget cables this length and I was happy to find these. They fit well, are well made, sound fine and eliminate “cable salad” created by any interconnect longer than these cables.I use an iFI Zen Air Can M99 tuned for the Meze 99 Classic headphones. It’s a solid setup sound wise but I needed to add an A/B switch to toggle between my two headphone sources. I use Tidal streamed music from a BlueOs Node 2i and a legacy McIntosh MVP 861 CD player.I added a Schiit Sys A/B switch ((Schiit calls it a preamp - that’s Schiit - it’s an A/B switch) for the two sources listed above.But I needed a midget cable. I had a 3 foot Tributaries RCA cable connected initially and it looked ridiculous all zip tied up.This pair of CESS “6 inch” (really 11 inch) cables was a great solution. Hope that helps!