Phanteks (PH-EC360ATG_DWT01) Eclipse P360A Ultra-fine Performance Mesh, Mid-Tower case, Tempered Glass, Digital-RGB Lighting, White

Pros- 2 addressable PWM RGB fans + addressable RGB strip built into the case- lots of lighting effects and very nice colours- for the RGB you can either use the built in controller if your motherboard doesn't have any RGB headers or hook it up to your motherboard- mesh front for excellent air flow- removable drive cage + a lot of space down below for cable management- front panel is made of metal separate from front io cables for easy removal- velcro straps in the back with lots of cable tie pointsCons- cable cutout for graphics card cables is tight- would be nice if it had 1 more 120mm exhaust fan in the back like the lian li lancool 215- case is made of a glossy white texture instead of matte like the NZXT H510- no cable grommetsOverall, an amazing value for the case. Great airflow, quiet fans, good build quality, excellent price, and lots of room in terms of compatibility and cable management.The closest competitor to this would be the lancool 215 and it's rarely in stock and that only comes in black. The white on this looks great, but has a glossy texture which I don't prefer.I 100% recommend this case. It has it all.

Wow, I love this case. It has an amazing asthetic, the white looks really clean, and it really accents my hardware and makes it look nice. It has a very sleek and high-end asthetic and feel when used. Then the airflow is second to none. It keeps my components cooler then they have ever been, and the fans don't even need to run very high. I love the mesh front and how good it looks with my rgb fans, but it also let's air in unlike a glass front. The little rgb strip under the glass is an excellent touch, and it even comes with two fully addressable rgb fans in the box, even with how cheap this can is! You can also tell that this was designed by people who actually build computers because it is so easy to build in. The only downside could be that the mesh front collects dust after a week or so, and you can see it with the white color pretty easily, but I kinda see that as a benefit, because it means it is not going into my hardware, and it is super easy to wipe off with a cloth. I would recommend this case to anyone. (As long as you don't want a disk drive, which this does not have the option for.)

Great case for the price. Lots of room for cable management, easy plugs - sata, power and HD audio. Only, I guess minimally disappointing thing was I had to put my AIO radiator in front instead of on top, because it was hitting ram sticks and covering necessary connectors. That might not even be a case issue though. Would totally buy again though. Great quality.

Overall: Great case would recommend for atx and matx builds.RGB: comes with 2 fans and controller which is great. A lot of options and controls on the case. Powered via SATA 3 with the option of an rgb header if needed (3 pin).Design and finish: Glossy pearl white with top magnetic cover and removable bottom filter. The glass side panel is pulled out from side and straight up . Bit of a learning curve with the reinstalling teh side panel but easy once you get used to it.Cable management: Easy to work with, lots of holes and cubbies to hide wires in. Also comes with hard drive tray which can be removed.

The metal is a bit thin, but in a budget case this was expected, the glass panel has a nice easy to remove/re-install system, but the back panel uses the old style 3 clips on top/bottom that need to be lined up then slotted in and slid into place.Coming from a full sized case this thing was a little tricky to build in and took just the right amount of swear words to get everything into place.Tip: Plan ahead for the PSU, that's going to be the biggest obstacle. Also keep in mind that in order to access the mechanical hard drive sleds the front panel needs to be removed, however it comes off with little force and goes back on just as easy, just something to keep in mind.Overall it's a very nice looking case, the build quality is also really good, it's just using cheaper materials. For the price I can't knock it, but for just $30 more you can get a Lian Li that has better features, but that's not to say this one is inferior, it's just not as user friendly.

Very pleased with quality and ease of build. Did upgrade to x2 140mm fans from phanteks to overcome the 240mm radiator and 120mm exhaust, would of skipped exhaust but didn't want radiator drawing from the vents instead of across cpu. 55°C cpu under load test so overall happy with results. And colors fit my theme perfectly. Great Case for value!

I challenge you to find a Mid tower case in this price point with this high build quality.Most cases I've worked with in this range uses the little "Punch out" Expansion slots on the back, where you use a screwdriver to wiggle and tear out the PCI slots. Not only does this NOT do that, thumb-screws for each slot.. but there are zero "supports" left once the slots are removed, so easy to install a PCIe Riser Kit for a vertical mount GPU. All the seams and join points are tight, and the Glass is so "clean" (Not just surface clean, but the glass itself) its hard to tell its even installed. Great Product, great airflow, I am buying this again for my next build.

The case looks amazing and is very clean. Quality control wasn't the best as I found that some of the thumbscrews to remove the side panels easily got cross-threaded but for a $60 mesh case and 2 ARGB fans, I can forgive it.Surprisingly does a good job of keeping dust out. After nearly a month, there's barely any dust in the case. Whatever I did find, a bottle of compressed air cleaned it up. Not too bad considering I have 3 dogs.ARGB fans sync'd up perfectly with my MSI mobo using Dragon Center.

El gabinete superó muchas de mis expectativas, funciona perfectamente a la hora de realizar la gestión de los cables, y tiene mucho espacio en el interior a la hora de manipular el hardware. Es posible retirar el panel frontal sin tanto problema, y el panel lateral derecho es de cristal templado. Incluye dos filtros magnéticos, el de la parte superior donde pueden instalarse y fueron movidos los dos ventiladores de 12 cm ARGB que incluye el gabinete de fabrica, y el de la parte inferior, donde ira montado la fuente de alimentación ATX. Acepta 5 ventiladores en total, dos en la parte frontal, ya sean de 12 o de 14 cm, unicamente en este lado, dos de 12 cm en la parte de arriba y uno de 12 cm en la parte trasera. Es compatible con sistemas de refrigeración líquida AIO con radiadores de hasta 240 y 280 cm de tamaño. Las medidas de placa base soportadas son ATX, MicroATX y MiniATX. Tiene para instalar unidades SSD de 2.5 pulgadas y hasta dos unidades de almacenamiento de 3.5 pulgadas.

Good quality

Case molto spazioso. Presenta 2 ventole rgb nella parte frontale e una piccola barra rgb nella parte sotto. Comodo il montaggio e l'installazione dei componenti. Prezzo un po' forse troppo elevato, però qualità molto buona

Ich habe dieses Gehäuse mittlerweile zum zweiten Mal verbaut und bin noch immer begeistert, wie aufgeräumt man den Innenraum gestalten kann.Das Frontpannel kann leicht entfernt werden und bietet genügend Platz um z.B. ein Push-Pull-Konfiguration für einen 240'er oder 280'er Radiator zu verbauen.Zu erwähnen ist hier, das im unteren Viertel des Gehäuses sich die Einschübe für die internen 3,5" Laufwerke inkl. zwei Rahmen zur schnellen Montage befinden.Auf der Rückseite ist Platz für bis zu drei 2,5" Laufwerke wie z.B. SATA-SSD, wobei zwei Rahmen mitgeliefert werden.Alle benötigten Schrauben und sogar ein paar Kabelstrapse werden mitgeliefert und befinden sich in einer unauffälligen Pappschachtel im ersten internen 3,5" Laufwerksschacht.Die Vorinstallierten Lüfter erfüllen ihren Zweck und sind dabei ruhig. Gut ist die Lösung mit dem oben aufliegenden und per Magnetfeld Arritierten Staubfilters sowie dem mittlerweile als Standard anzusehenden Filter unter dem Netzteil, das mit wenigen Handgriffen zu reinigen ist.Das hier verbaute System bestehen aus einem MSI B550 Tomahawk, Ryzen 5 5800X und einer GTX 1070 blieb selbst bei 32°C Raumtemperatur im Grünen Bereich von unter 70°C (CPU) und selbst die Lüfter der Grafikkarte sind beim Zocken nicht höher als sonst hochgefahren.Die Kombination aus schwarz und weiß macht dieses Gehäuse zu einem Hingucker und mit entsprechender RGB-Steuerung lässt sich noch einiges rausholen. Aber auch ohne Beleuchtung schneidet es optimistisch sehr gut ab.Positiv zu erwähnen ist hier, das das Mainboard grundsätzlich keine Anschlüsse für RGB bereitstellen muss, da das Gehäuse über eine rudimentäre Steuerung verfügt, über die einige Effekte abgerufen werden können.Wer an einem ausführlichen Review zu diesem Gehäuse interessiert ist, dem kann ich hier Gamers Nexus ans Herz legen.

Not much to say, it's great value for the price. Airflow, Included fans, RGB, Tempered glass side pannel, what more could you ask for? This is basically a smaller P400A, a legendary case in it's own right. Though, the P400A is usually available for around the same price, and I'd definitely recommend getting that for the extra space.