Porch Lights Wall Mount Outdoor Wall Lantern Waterproof Aluminum with Frosted Glass Exterior Light Fixtures Modern Classic Outdoor Wall Lights for Outside House Deck Patio Garage Lighting, Black

We purchased two of these lights and we love them! See the detailed review from Mac Cat on September 24, 2022. Its very well done and has a lot of helpful installation tips - especially about removing the glass housing and installing just the base first. I also agree with him that it was one of the best packing jobs I'd ever seen for a light fixture. Any damage reported in other reviews must have happened at the factory before they were packed so there could be quality control issues. Luckily the two we received were in great condition. One additional tip I'd like to add is that the parts kit is actually located underneath the useless test bulb they include. My husband had his own screws and wire nuts so it didn't really matter that we found the kits when we were throwing the boxes away. The parts kit also included a cap that you could place over the light sensor in case you would rather turn them on manually. The lights look great and I would say they were an excellent value considering the cost of similar size light fixtures.

Great kit - it's a BIG wall lamp!IMPORTANT: Remove the glass housing and install the base first.Then attached the glass housing, which is pretty heavy.Make sure you don't lose the two very small rubber washers on the mounting screws. They are black and very hard to see.All of the necessary hardware and a small LED bulb are included.The packaging really couldn't be better - professionally preshaped styrafoam encased.Parts kit was helpful, but you may want to use your own wire nuts. I found them too small to use even with my 14 gauge wiring.The instructions were very incomplete and vague - not very helpful.So, that is why I posted this review with a few hints.I have installed 6 of the lamps now.Anyone who has installed a wall light should have no problem figure it out. It's not very complicated, however I wanted to share a tip from previous experience with this kind of light.See my photos of how to extract the foam block and cut off a piece to use in the base.This is to see water and bugs out of that hollow area. it's not required, but all of the lights I removed to install these new lamps, were filled but dirt, bugs and spiders.So, my hint it to use the foam block that is inserted inside of the lamp to make a foam insert for the base. Use a very sharp bread knife to slice off an inch thick piece of that foam, which is the perfect width. You will then have to remove about 2 1/2 inches, because it's too long. Then I cut a slit to pull the wires through and pressed it into the base. Use a screw driver to make holes for the mounting screws.The screws only extend for about 1/8" which is only 2 threads. You have to really press the base plate hard to expose the mounting screws, but it will work.I mounted mine on a heavy uneven stucco facade, so I had to bend that mounting plate a little on each side to get the screws to come through enough to put then nuts on.One of my electrical boxes was a rectangular outlet box, and that didn't work with the universal plate. So, instead, I was able to get two 3" screws (#8) and just install them instead of using the adaptor plate. Lights are supposed to use a round box and usually a metal one.Hope this helps. The first one took me about 30 minutes to figure out, but the rest installed in about 15-20 minutes.

They are built solid, work great and look amazing. Nice size, not a small light but not huge either, scale is perfect for our house. Only down side is the light that comes with them, they are not as bright as I would like and they are short so they look awkward.

Beautiful design outdoor porch lights. It was a bit hard to install because the house’s hole for the cords were not as deep to make the wall connection to be flashed to the wall. I guess the screws were kinda too long to pull the whole fixture closer and flash to the wall.The whole experience with the company is exemptionally great. They were fast in resolving my broken cover problem. Thank you for a job well done.

Looks and feels more expensive. Heavy. Nice craftsman look. Nice textured Matte paint.

We ordered this light but did not end up installing it because we were hoping for the yellow-tinted glass that the photo looks like. We found that the glass was completely white and the yellow look is dependent on the light bulb. Because of this we'll be returning the light. However, if you're looking for the white glass look I would recommend this product. It feels like excellent quality, solid and heavy duty. I'm disappointed that it didn't work for us since it seems like a great match of quality for price!

Visually the design is pleasing and was reason I purchased five (5) lights. Quality control is missing. Per attached pictures one unit was has badly damaged edges on two of four corners. Despite no package damage. Many of thumb nuts had to be forced on due to burrs on mating screw and/or on tapped nut. Inconsistent color between some of the thumb nuts. Three different shades and three different knurl patterns. The mounting process is made very difficult due to the housing screws being too long. This means some units are not able to be tightened flush to the wall. Only one size screw is provided for this part assembly and no way to alter the bracket to accommodate different wall mounting situations. There is no actual company or manufacture name on any of the paperwork or customer service contact information. Manual is poor quality.

Minor chips in the glass on one pane out of eight (2 fixtures), but it was obscured in the back so it's not easily seen.They look nice, was very pleased with the quality especially considering they weren't super expensive.