Modular Y Carriage Plate Upgrade for 2040V Aluminum Profile for CR-10 3D Printer (260mm)

I ordered this for my Ender Extender 300 kit, Others were saying sharp edges and holes to small that was not the case on the one i got, perfect fit and easy to install, I also ordered a new 310 x 310 x 3mm hotbed for it. Overall i am happy with it and 3 point leveling is the way to go.

Three point support of the bed is not only logical, but it works amazingly well. Three points define a plane. Not four. In less than two minutes, the whole bed was level within one one-thousandth of an inch. Amazing. The best I could do before was three thousandths in the central area and seven thousandths of the whole bed. On the other side, a few instructions and pictures would be nice, but I figured it out. Less than two hours installation, even with a few mistakes thrown in.

I've tried everything on my Ender 3 to get it leveled right. CR-Touch upgrade, Dual Z-axis screw upgrade, and solid bed mounts.Turns out, I just needed to replace my carriage plate.If you've been struggling getting your Ender-3 level try this first. (I'm not mad about the other upgrades. However, this finally fixed the issue I've been chasing. I probably wouldn't have done the others if I would have stared here.)

Ender 3 Pro - SKR v1.4TurboOverall, this Y carriage worked out pretty great. I'm enjoying having less to do in order to level the bed.However, what I didn't like is that there are no included direction of any kind.I understand 3D printing is a DYI sport of sorts but even a small card with a couple pointers would be great.So I will share what I learned...The orientation is not overly important, you will either have 2 wheels on the right and 1 on the left, or you will have 2 on the left and 1 on the right.If you are using Klipper and the SCREWS_TILT_CALCULATE command, I recommend setting the location of screw1 as the single point side of the bed. Then 2 and 3 as the side with the 2 wheels. This will make the single wheel side as the constant and you will have more control over leveling on the side with 2 wheels.Also, be sure to check your Y endstop switch after changing the carriage.I had to loosen the screws on mine, move the endstop switch forward about 15mm, then adjust the Y-axis MAX in the firmware.Other than that, everything is great.Just a little extra effort could have made this an easy 5 star review.That wouldn't stop me from buying another if I needed though.

Perfect replacement plate for my Ender 3 v2 Neo.

Build a custom 3d printer frame and needed a large bed carriage. This works perfectly. I had t print a mount so I could inlay it with linear rails but its working very well for my needs.

For Ended 3 Pro Perfect Fit!

There is obviously some QC issue with this product as others have stated. The point of purchasing this product is to make bed leveling easier by utilizing 3 points instead of 4. However, if the bar itself isn't flat... then bed leveling will just give you a headache.Reached out to the seller regarding the bent bar and they basically just said to return it and buy a new one. Fair enough. My buddy also purchased one and his was also bent. So after hearing that, I ended up buying the Gulf Coast Y carriage plate instead. Sure it doesn't have prime and won't get to you fast, but at least it's from a reputable company.Skip this product and purchase one from Gulf Coast instead.