DongarDashcam Power Adapter (10-pin Type E) for Select Mazda Vehicles. Compatible with 2017+ CX5, CX9 and More. Connects to Rearview Mirror, Built-in USB Power Source, Easy to Install

Bought this adapter for a 2025 Mazda CX-70. Truly a plug and play application that fit nicely in the rear view mirror housing. Definitely provides a clean, dangle-less look. It is being used to hook up a VIOFO A119 and so far is working great.

Works perfectly for Mazda 3 Hatchback 4th Gen models. I do not have photos, but the connection is pretty much the same as those with a CX-3, CX-5, etc. Some said to use sliding force to remove dashcam cover, I had to use the pry-bar gently. Otherwise, this is a great solution compared to using a Fuse Tap / Thief.

Good product but be aware and do your research I purchased one that did not support parking mode for my dash cam and will have to purchase the pro version. My fault not theirs.

Literally plug and play. I recommend double-check ports are correct before ordering. When installing pre plan your set up before peel and stick. Use small zip ties to better secure/ compact wires. I will re order again for future vehicles.

Doest fit 2017 Mazda CX-9 Signature model. You need to order the type A connector.

I recently bought my Mazda CX-30 (Luxury 2020 model with Skyactive-X engine) and wanted to install a Dashcam, but also trying to make it as clean as possible, so without pulling cables through my car. After some searching on the internet I came to this adapter, sadly I couldn't find it in Europe so I had to import it from the US. I'm using this adapter now to power my Viofo A229 Plus and it works perfectly with this dashcam. It turns on once my engine is started and will turn off, once it shuts down. So this adapter will not work with parking mode.Definitely recommend this adapter.

Installed on 2024 Mazda CX-5 in Preferred trim level and worked perfect. Very easy to install (10 min at most) and offers a perfect power solution for my dash cam. No more dangling wires or long wire runs to the fuse box.For full disclosure, I did search and watched in advance some videos for installation on my car. Once you know how to take apart the covers behind your mirror, everything else boils down to unplugging and plugging back in two connectors.It is not inexpensive for what it is, but the wiring is perfect for the car is intended for. So, in my opinion is that the value is there. You get what you are paying for - perfect fit and hassle less installation.

Installed this on a 2022 CX5 Preferred. This product is overpriced for all it is but it makes dash cam installation a breeze compared to running wires all over the place and near the air bags. I recommend only removing the left side of the mirror cover. This allows you access to the connection and makes it easier to tuck in the wires. They include 3 different short cord connectors and a plastic pry tool to remove the cover - just start at the small notch at the bottom and it pops right off. It makes dash cam installation a breeze. While is specifies for frame less mirrors, my mirror is not and has the homelink buttons on it and this works perfectly fine. If you are unsure if this fits your vehicle, go to their website to confirm.