Feit Electric LED Recessed Downlight, fit Most 5-6" Housing Cans, Baffle Trim, Dimmable, 75W Equivalent 10.2W, 925 LM Retrofit kit, 75 Watt, 2700K Soft White, 6-Pack LEDR56B/927CA/MP/6

I trust FEIT. I've never heard of many of the competing brands, and their reliability sounds terrible.First, I ordered a 6-pack. Then I liked them so much, I ordered another 6-pack and some C-clips I installed for 10 lights, saving 2 as spares . All 12 of the lights worked. C-Clips are not included.Only downside, I wish FEIT had included a foam ring to seal between the ceiling and the fixture.I retrofitted my old incandescent cans with these fixtures. They look nice and do a good job stopping the cold air that leaked - make that blew - around the cans. Light is bright, good color rendition. Springs are used to hold the fixture in place. C-clips are not required, but make the fixtures fit much tighter.My 5-star rating for longevity is more of a wish than actual experience. Some reviews for other LED fixtures report a high failure rate on arrival or within the first 2 years. Hopefully, the FEIT will do better. But over the long run (10-20 years) I anticipate some will fail. In the future, exact replacements may not be available, or will be pricy buying one at a time. I already have 2 spares (installed 10 of 12 I purchased) and will buy another 6 pack giving me 8 spares. I'll update this review in 20 years to let you know how many I used!

My intention was to replace 12 incandescent can lights in my kitchen ceiling . Before placing the order, I verified that my existing cans had the dual hook points for receiving the mounting spring wires that can be seen in the product photo. This is critical if the replacement lights are to mount correctly and stay in place. I bought two 6-packs of these Feit lamps to replace the old BR30 bulbs. The procedure was easy:1. Unscrew the old bulb2. Take out the metal baffle (or "skirt") that was held in place by two springs3. Used needle-nose pliers to removed the two springs.4. Screw in the replacement unit's power adapter to the E-26 base which held the old bulb in it.5. Plug the new Feit into the connector on the power adapter.6. Pinch the spring wire mounts on the Feit together, and put the unit up against the old can, making sure the spring wires go into the dual hook points in the can.Up on the stepladder, I handed down the old bulb, shroud and springs to my lovely wife, and she handed the replacement Feit unit up to me for installation. Did this 12 times in under 20 minutes.All units worked out of the box, no DOAs, and they all dim consistently and uniformly using a Lutron MACL 153 dimmer. A Diva would work just as well. Far brighter than the old Halogen BR30s. For me, the dimmer is necessary. Totally satisfied. Worked out to about $8 per light and I anticipate never having to climb up and deal with them again.

Same product but better price than the big box store.

I actually got these last winter. I am very pleased with this product. I installed them myself with ease. I wanted to use the for a while before changing out the rest in the house. My usage has decreased since changing to LED, plus my heat doesn't appear to escape as quick.

Well none of the ones in the 3 boxes I received were 'like new'. However, they only had a few small scratches and a few small bends that were easily straightened out. Definitely worth changing out the old metal ones that rusted outside (from the salt in the air at the beach after only 3 years) for these. Feit products have always been very reliable for me. They are very attractive, 2700 K color is right on target with the screw in BR30's. Absolutely worth replacing your old can lights & inserts with these plastic type that won't rust outdoors.

Good quality product and great price.

I upgraded my traditional cans with these to limit the airflow from the attic into the house. It worked! They keep the house cooler in the summer and warmer in the winter. These are not on a dimmer switch so I can’t comment on the dimming hum that many LED lights suffer from. For my needs they work great.

Perfect fit. Good color temperature. Easy to install.