BAZIC Silicone Glue 3.38 Oz. (100 mL), Waterproof Crack Resistant, Quick Repair for Glass Window Plastic Kitchen, 1-Pack

Recommended, I used to use this kind of glue for my models (I'm an Architecth) right now I'm using it for scrapbooking and it worked nice!!!

I bought Bazic silicone adhesive well over a year ago, and have used it successfully in numerous craft projects and small home repairs. The most recent repair job—and the one that finally prompted me to write a five-star review—was getting a much-abused refrigerator interior back in shape.I bought a house that had a working fridge, but most of the plastic interior shelves and drawers were so badly broken, they were nearly unusable, and the gasket around one door was falling off. Honestly, I've never seen a refrigerator with such a beat-up interior, and it was old enough that the fittings were impossible to replace.Not wanting to spend money right away on a new fridge, I decided to try putting the broken interior fittings back together. I chose Bazic silicone adhesive because it doesn't stink as bad as E6000 or similar adhesives, and it cures quickly. I also needed something I was sure would withstand the cold, damp conditions inside the refrigerator and freezer, not grow mold, and not be affected by cleaning products.I unplugged the fridge, thoroughly cleaned every surface in, on, and around it, let everything dry completely, and then used Bazic silicone adhesive to repair it all as best I could, holding everything together with blue painter's tape. I let it all sit for 24 hours at room temperature before reinstalling everything and plugging the refrigerator back in.There were some pieces that had broken off entirely and were missing, and I couldn't do anything about that, but I did get the cracked and loose drawer fronts back on, and mended the plastic frame that goes around them (which had a huge, jagged crack all the way across it). The shallow, full-width drawer in the freezer is still missing its entire front edge, but I mended the big cracks in the bottom of it.Nearly six months later, all of my repairs are still holding up just fine, in a refrigerator that gets regular use. There were some repairs I thought might not hold under the stresses of normal use, such as the cracks in the bottom of the freezer drawer, but they are still going strong, which has been a very pleasant surprise.I still want a new fridge, but the one I have is perfectly useable for now, and probably will remain so for a long while to come. I was already impressed with this product, but it's performance at keeping my fridge held together takes it to a new level. Thank you, Bazic!

I prefer to use hot silicone because it dries quickly and doesn't have a strong smell, but some projects require me to use cold silicone to quickly correct mistakes I make when joining pieces together. So I decided to try this one and I don't regret it. This cold silicone has a perfect drying time for my projects and the smell isn't unpleasant or strong at all. The residue left on my hands is very easy to remove and doesn't stain my projects. I will order again.

Final results were 👌🏼My application was to adhere aluminum to wood, which bonded beautifully once the glue had set up (in my case 3 hours). Since this product is quite thin, it did take a bit of care in order to keep the application area clean ~ something to consider if your application is on a vertical surface.All in all, for the nominal investment, I'd give this glue high marks! Just be aware that it's runny and plan accordingly to keep your project free of excess dripping....a helpful hint: allow the glue to set up for a minute or two prior to adhering your two surfaces.

Exelente producto

Good value. Sticks as well as hot glue without the burn risk and hassle. Long lasting. Love it

Good glue good price

one of the products was already used