MoenM-Dura Posi-Temp Shower Trim Kit, Commercial 7-Inch Classic Shower Valve Control Trim Kit, Valve Required (Sold Separately), Brushed Nickel, T8370CBN

Easy to install if you're not using the white things that restrict how far you can turn it. I was going to use those but couldn't figure it out so I tried without and it works fine. I guess they help restrict how far I can turn it so someone wouldn't maybe burn themselvesBut hey, great product and must have decent instructions if this single mom could do it just fine!I only bought it cuz I changed my shower head from chrome to nickel so I neededmy handle and Trump plate to matchI had the old school plain chrome with the clear plastic knob This handle went right on and screwed to the existing piece that comes out of the wall, so I didn't have to change anything else! So glad it worked!

This replacement Moen shower kit was purchased because I had refurbished the bath and put in a cheap Danco kit that started to flake apart. The Moen product is made of metal (brushed nickel in this case). It fit perfectly, and I was able to install it within minutes. Just one note about installation; you will need a "starred" screw driver bit for the two new screws that go in the plate, and you will need a squared screw driver bit for the center screw in the handle. I had them, so it was easy. However, I assume you could re-use the old ones. I just preferred to use the new items.UPDATE. I liked it so much that a purchased a second kit to replace another bathroom that had that same plastic kit. At first, it seemed as though it didn’t fit the same (the handle seemed to stick out further). Also, the handle center screw wouldn’t catch.I removed it to see what was going on. What I found is that you need to make sure the positemp retaining pin is all the way in. If not to center post does not slide all the way in (the notch at the top slides over the top of the retaining pin).Once I tapped the retaining pin down the silver center post slid all the way in. Once reassembled, it fit perfectly.

Approved by our plumber for a bathroom remodel!. Great value, much less than plumbing supply store

Directions were confusing to me as too much info on models not purchased. No tools for those crazy star head screws! Hard getting off old handle as had to find the hex key which I was lucky to find. Anyway overall easy install if you have the tools you need. Hate those crazy star heads though give me easy screw heads or the tool I need.

Had to replace or valve and decided to upgrade the trim and handle at the same time, this was a better deal then the model we had, but it seems nicer and more robust.

We have had good luck reliability-wise with Moen products so they are my first choice when buying new or replacing fixtures.We wanted a magnetic docking feature after our old one, not a Moen, kept slipping out of its holder. The magnetic catch on this is very strong and gives you absolute confidence it won't fall out of the holder.The spray pattern can easily be adjusted. Turning it on is done by rotating the lever counter clockwise from the 6 O'Clock position to the 9 O'Clock position which will be fully hot. The mount angle easily swivels from side to side and up and down to adjust to where you want to aim your stream.Dried water spots wipe off easily on ours but will depend on the hardness of your water.

Very easy install.

Good