CarbhubCRF80F Carburetor for Honda CRF80F XL80S XR80 XR80R XL75 XR75 XL70 SL70 Carburetor with Throttle Grip Cable - Honda XR80 Carburetor

The plastic cable rotor might not last. For the price not bad.

Carb machining is rough, but works fine. Throttle grips are plasticy junk. Throttle inner cable too short, and cannot go down to idle!!! So I ended up using the carb, and all my other old components. I would suggest just buying the carb alone somewhere at lower price.Edit: couldn’t get the carb to function properly. Ended up returning all.

like the title it fits the XR75..techinically ?im in the process of rebuilding my 1974 Honda XR75 and needed a replacement to make sure the engine still ran. the first issue is that where you screw the carb onto there intake boot the holes are off probably a quarter of an inch, i didn't care i took my Dremel and ova-led the holes made it fit. Second issue is that it wont sit right on the bike it goes and fits but you end up getting the choke stuck behind the frame. and the throttle and grips work awesome... but they only work with this carb they wouldn't fit back onto my khelin stock carb .the quality is definitely cheap metal so i cant imagine how long it will last but hey it works for what i need . now on the good side i was just trying to get the bike to start and guess what it started and runs just and the throttle is awesome (after a lot of lube on the slide and cable) . so in a way yeah it works you probably can just throw it on and put a little K&N air filter on the back and be on your way. Just be aware that it may need some massaging . Oh and it idled high i was trying to mess with the idle screws but didn't really notice a difference so also something to note.

The carburetor worked perfectly. The throttle worked perfectly other than it was a little short like even fully equipped. It was still running all the way open so I had to cut the plastic down a little bit to adjust it to where it could actually close an idle. But other than that it's perfect as you see in the pictures the dirt bike starts one try

Carburetor top came off after a couple seconds of being on. The only thing that was good was the throttle cable and handles. Even then I had to smooth out the plastic on the inside of throttle handle. I honestly regret buying it but am already behind so ill have to make it work.

Cable was too short would wide open throttle when put together even with adjuster screwed all the way in everything else was amazing

This product I bought for a xr80 and the product in the box will not even fit . The cable is to short.

Would not throttle correctly,inside bore looked like it was honed out with a hand held drill. Had to repair old one to work. Handles don't fit right either. Said it fit honda xr80 but not the case.

Pièces correspond a image de annonce du vendeur

First issue as mentioned by other people....carb choke lever is too short to use. I had to pull off original and use that. If you take out jets and inspect them....they're bent and deformed. Very thin material on jets. I ended up using just a couple screws off carb and seals to fix old carb.Throttle cable was fine. Clutch side handle grip was fine. Twist Throttle was subpar and ended up remBuilding original and using that. Too much plastic. Throttle cable was less insulated than original.Over all...if you were stuck in the boondocks and needed something to get home, this kit would work. Over priced for actual value. 3 items useful: grips, Throttle cable, and fuel filter.