KITCHEN BASICS 101 2024 Upgraded 5901A000 Fan Blower Wheel Assembly Made in The USA, OEM, Compatible with Broan Nutone Fan Blower Wheel -2 Year Warranty (Pack of 1)

I had an old nutone bathroom fan that the squirrel fan blade cracked on and I searched for a long time and I found this and it was the perfect fit I was so excited I didn't have to replace the whole entire fan it was from the '70s but still works good

Works better than new! Great product!

Fan replacement fit great and matched original perfectly.

I bought a replacement fan motor but could never find a fan blade that worked. This one fit perfectly. It has the D shaped hole. Line up with D shaped post and push it on. Done and works fine.

I replaced two exhaust fans with these blower wheels. They fit perfect, were easy to replace and my fans are much quieter! Perfect fit.

This was a perfect snug fit for a Nutone bathroom exhaust fan from the 70’s (The kind with a two-prong plug and has a simple slot-screw bracket that holds the motor and fan in place.) As described, it has the appropriate blade orientation and airflow and axel shape (flat side). Received the blade quickly with clear and simple instructions. The original blade/rotor/drum cracked at the center of the hub and wouldn’t hold tightly on the axel. I tried gluing it twice with no success. There are “quick kits” that you can get for $50 to replace the entire motor, blade and faceplate. But if you are even just slightly handy, this replacement blade will save a good bit of money in trade for a few minutes in doing the swap. You’ll probably spen more time cleaning the dust and crud off the fan motor and bracket.

Quality? Looks to be pretty strong.Materials? Appears to be nylon, or something equally strong and damage resistant. (trust me, I tied).Easy fit? Yes. No 'grub' / locking screw involved. If you are replacing an older metal blower wheel, this will be easier to put on, as long as you align the flat side of the shaft with the flat side of the hole ins the wheel.Advice: read each an ever part of the sellers product details. You MUST know your fan's model number. My 30 year old fan has it stamped into the steel.This one does not fit my fan. I did not read the product details. I did not know my fan's model number. This part is just slightly too large to fit the hole in my fan box. I failed.However, if your model number is in the list of supported products in the description, then you should be good to go. If it is not, then you are going to need to look for something else. Don't try and modify the wheel to try and make it fit. You will weaken it and throw it out of balance. Don't try and modify your fan box to make it fit, unless you know exactly how to do it safely and correctly. You will introduce more problems if you try. At this price, it is just not worth it.

Exactly as seen in the web site. This is what I needed.