Master Airbrush 1/5 HP Cool Runner II Dual Fan Air Compressor Kit Model TC-320 - Professional Single-Piston with 2 Cooling Fans, Longer Running Time Without Overheating - Regulator Water Trap, Holder

Great pump, have had no issues whatsoever. It is smaller than I thought. It is lightweight and easy to carry about.Comes in box 13"x14"x6".I was able to get the pump to deliver up to 50psi with no issues. The flow rate is more than adequate for airbrushes.The pump is quiet and I use it in the house with no distraction to others in the house.Parts, components and construction appear to be quality. Though built in China, I would give it the Chinese 5 out of 5 rating.Great prince for a good little pump.

This is a very quiet compressor. It sits on the floor beside my easel. I added a "T" with couplings for two lines for both of my airbrushes without switching. I also use a wiress remote for power on/off touchless ease. I am very satisfied with this little compressor. It seems to be built very well and I'm sure it will last a lifetime.

Good products perform well and provide good value. Great products perform amazingly and provide ridiculous value. This is a great product. It's design and function is specifically aimed at airbrush enthusiasts, and the value, quality, and functionality are outstanding. Easy to use straight out of the box, just a great piece of worksmanship. The added touches such as a retractable handle, airbrush holders, and rubber feet which reduce "walking" show they understand their audience. Additionally I bought this based on decibels, I was looking for sound mitigation, this has it in spades. This is an amazing air source to push your paints with consistent pressure and minimal maintenance and sound.

As yet I don't know much about the Master Airbrush Model TC-828, other than is is not very noisy, as I have only been able to turn it on and squeeze the hose to make it fill and then turn back on. The reason for this is the hose that came with the compressor fits the compressor but the other end of the hose is too big for any of the airbrushes I have found which are the Paasche Talon, Neo for Iwata, Thayer & Chandler T89 Omni 4000 Airbrush and a cheap Chinese knock off. To me this is very unsatisfactory. I have gone to some hardware stores and have not found any that had adapters that would work as the threads are not standard for the USA. I think they are 1/4 inch British Standard Pipe (BSP threads. I tried 1/4 inch National Pipe Threads (NPT) and they do not work. They will start but don't line up well enough to seal. There is no indication in the description of needing to buy an adapter. TCP Global Corp is the selling company and it seems they sale the adapters but the shipping cost more than the adapters. I will update this review when I find a way to use the compressor and or have more to say.Bottom line if you buy this compressor make sure you buy an airbrush hose.Here's an update and it is why I dropped the rating down to 1 star...I sent a message to TCP Global via Amazon and here is my message...To Whom it may concern:I have written a review giving the Master Airbrush Model TC-828 a rating of 2 stars and consider it defective even though it appears to work.I say it is defective because the connector on the hose will connect to the compressor but will not fit any airbrush. There are no adapters available in my area. I do not feel it is proper for you to sale an item made for airbrushes that will not be able to connect to them. Your description does not say anything about needing adapters or what kind of fittings the hose has. I have since learned that you sale an adapter set, but I don't believe you should sell the compressor and then expect your customer to later buy an adapter they don't even know they need at the time of purchase.Here is the response...Hello,The manufacturers that sell airbrushes that'll hookup directly to our airbrush air hose are the following: Master, Devilbiss, Iwata and Harder & Steenbeck. The manufactures that make airbrushes with smaller fittings that don't hookup directly to our airbrush hose are Badger, Paasche, Thayer & Chandler, Testors and Aztek. Our main sale is the compressor and we're throwing in the airbrush hose for free. Usually we have customers contact us for further information and details.TCP GlobalAmazon Sales58My latest response...Hi,So you are saying that you are giving a free hose that will not work between the compressor and any airbrush and that the hose being useless is ok with you since the hose is free?I believe I am doing what your customers usually do and contacting you.So far a dissatisfied customerWell here is another update....Hello,Were not just offering a free air hose for no reason because there are airbrushes that will hookup to it. The brand of compressor we're advertising is a Master, and with the being stated on the listing, the free air hose supplied will fit a Master brand airbrush. However, as we previously stated it will also fit an Iwata, Devilbiss and Harder & Steenbeck airbrush because the fittings on the ends of those airbrushes are the same as the supplied hose. We're more than willing to send you an adapter to accommodate one of your airbrushes, just let us know which brand you have.TCP GlobalAmazon Sales58My reply...Hi,I hate to be the one to tell you this but the hose you sent me will not connect the compressor to an Iwata or a Master airbrush.It will connect to either the compressor or an Master/Iwata airbrush but not both as the ends are different.The hose has one connector that is 1/8 which will fit the compressor or the Master/Iwata airbrush. The other end of the hose will not fit the compressor or the Master or the Iwata airbrush as it is too large to fit either. The hose has one connector that looks like a 1/4 which is way too big to fit either the compressor or an airbrush the other end looks like a 1/8 and will fit either the compressor or an Master/Iwata airbrush. I want to connect a Neo for Iwata which is the same as an Iwata and a Chinese no brand name airbrush that is a copy of an Iwata. The problems with adapters is they leak unless you seal them with something which I don't have. The best answer would be a hose that has the 1/8 connector on both ends. That is the kind of hose that should be provided with the compressor.So far a dissatisfied customerDon CoplinTheir reply....Hello,We sincerely apologize, but the hose we supply with the compressor is the wrong version. We depict the correct hose, but our parts breakdown has the wrong type of hose bundled with the compressor. It should actually be a 1/8"-1/8" hose, not a 1/8"-1/4" hose. We have corrected the part number in our system and we have also updated the listing. Would you like for us to send you the correct hose? Thank you for bring this issue to our attention.TCP GlobalAmazon Sales58I replied that I would like them to send me the proper hose. When I get it I will once again update this review and maybe then I can add some more pertinent information about the compressor it's self and maybe change their rating.Time for another update...I got the new hose and tried the compressor. It works quite well but the adjustment for the air regulator is not as accurate as I would like but I can live with it. Just wish the gauge was marked so it was easier to read and showed one mark for each psi.I have updated the rating to only 4 stars because the problem was fixed even though it should not have happen in the first place.

Saw some reviews about noise that worried me a bit. Nice quiet operation. Plenty of air and a pleasure to use. Well packed, no complaints and fast shipping.

This is the best designed airbrush compressor I have ever owned!

For the price, this thing works very well!