Iverntech 6pcs 1M XH2.54 4 pin to 6 pin Terminal Stepper Motor Cables for 3D Printer Nema 17 Stepper Motor

I ordered this to replace the damaged cable for my Creality CR-10S Pro v2. The cables were just the right length and replaced the stock z-stepper cable without need for modification. Best part, for about $10, I have spares (a printer design and fatigue issue, not the cables).

Bought for Ender3 extruder motor. I followed the text that said swap middle wires, swap red/green...well after that didn't work right.So I ignored the text and arrows in the photo, and did a "spot the difference". Turns out 3 wires needed to be repinned.Luckily it didn't short anything on my printer...directions to repinning were just plain wrong.At the end of the day, it works...but I would've preferred buying something plug and play or even just having correct directions/instructions.

Had to swap the 2 middle wires to work with my stepper motors. Otherwise as advertised and working as expected.

These were not wired correctly for the Nema 17 Stepper Motor on an Ender 3. I have a feeling it burnt out the stepper drivers on the board. It needs to be Blue/Green and Red/Black on the 6-pin connector.

The listing claims in the title you get 12 pieces of 1.5M long XH2.54 4pin to 6pin Terminal Stepper Motor Cables. YOU DO NOT! You get only 6, and then 6 with Dupont connectors instead of xh2.54 connectors!Misleading posts like this should NOT be permitted!

As described

This fit my nema17 stepper motor perfect.

works good but needs some tuning for a creality printer

My Voxelab had been playing up for a while and I finally got time to look into why and noticed one of the exiting stepper motor cables had got damaged somehow. Initially tried ordering some new sockets but they were the wrong size so in the end, for ease, plumped for this direct replacement and it worked immediately. Problem solved. I didn’t need all four but I guess they may come in handy one day. A little expensive for a few bits of wire but I paid for the convenience.

Forgive this review if I have misread the description (bear in mind it may have been updated since I purchased this product). Like many, many other listings (I have now discovered) - these cables commonly used in stepper motors are not JST XH connectors - at either end. Yes, one end has a 4 socket "dupont" connector. At the other end is a 2mm pitch - not 2.5 or 2.54mm pitch - JST style connector. Closest JST range appears to be the PH 2.0mm style. They do fit many stepper motors but if you actually want what is advertised - a 6 socket 2.54mm pitch JST connector - these cables will disappoint.

Item as described and work well. Personally I changed the order of the colour wires to match my other wires but that was easy as they just pop out with the aid of a small screwdriver and just pop back in.

Well made cables, no issues. I’ve ended up shortening some of these to suit my printer but the length was really useful on the X axis (225mm Z height, 260mm X all in cable chains)

Cercavo dei cavetti da 50cm per i motori passo passo di una prt 3D.La confezione include 6 cavetti, connettori ben attestati, possibilità di invertire i pin per adattarli all'uso che se ne vuole fare.Rapporto qualità/prezzo/quantità ottimo