Made in USA, STEADYfast Stabilizer for 5th Wheel, Travel, and Camper Trailer Without Auto Leveling - 2 Foot Plates- Item A

This product is great! It really stabilized my fifth wheel rocking motion. Movement at one end of the trailer could be felt at the opposite end. This kit dampened about 98% of that movement. I said easy to install, but that's for someone who is handy with a set of tools. I did have to remove my spare tire from it's crank down mount and mount on the rear bumper. I highly recommend.

They shipped in a large box with lots of pieces. Everything was there, and labeled for assembly. Instructions were fairly simple, just make sure you read everything. Read it all thoroughly. Worked just as advertised. Its another couple steps now when moving the camper, but worth it. They make a difference and are worth their price.

Very well engineered product. Install was very straight forward, as the instructions are well documented and include many visual (picture) aids. Packing and shipping was very good. We installed this on a 27' travel trailer (Forest River Cherokee)that had a great deal of movement before. Just walking, even slowly could be felt while laying in your bed. After installation I found the front was very solid and had very little give when doing the push test against the outside of the rv. The back still has some movement, but I believe that can be improved by playing with the blocking on the feet and some adjustments. It may just be poor design of my particular trailer with the spacing/position of the jacks. I will say the owner is very helpful and responsive and was quick to reply to my emails to answer all of my questions and provide possible solutions. Overall even with the back not as dialed in as I would like, it made a big difference and was worth the money and time in my opinion.

Wife hated how our travel trailer felt like a boat on the water when I walked around (I'm not a light weight). These took out 95% of this trailer motion. We used x-chocks before but they really didn't help that much. These are a great solution.Installation on the other hand was a pain. Due to how my drop frame trailer is made, I had to fabricate an offset plate to easily install at the front end of our trailer. I didn't like the access and mounting area at the back end so that's how I "solved" the install.

I am seeing some improvement with the installation of this product. Absolutely no complaints on the product itself. I am still experiencing quite a bit of movement with someone walking inside the unit. I run a 2013 V-Lite 30' WRKSS. I am coming to the conclusion that this may be as good as it gets as far a stabilization due to the close axel proximity, torsion bar suspension, and the weight of the trailer itself as constructed.

Pre-installation review, 12/21/2018:This kit is impressive! Simple, overbuilt, well constructed, well presented AND and good looking! I'm very pleased with the affordable cost. I went to the hardware store with a DIY plan ready to price out the parts....and after I got to $60 for some of the basic raw parts (pipes, bolts..etc...) I realized how valuable this kit really is! My design didn't include nice knobs, a painted a finish, or the price of my time to build it...After the hour of shopping I realized I would rather not bother, and bought this instead.The steel is quality and all crucial parts are externally coated with a quality paint. The knobs are HUGE for easy turning and the steel tubes are thick.This set could have been made with thinner, cheaper tubes, smaller knobs, fewer bolts, and left us disappointed; but it WASN'T and I'm very happy with the quality.The locking nuts for the adjustable rodseven have two, rather than just one nut/bolt, so once you fit the kit, it will stay put, and be super solid. It's definitely made to last and stay mounted properly in transit.I'll repost with an update after installation after the new year!

We are full-time RVer's who began this full time adventure in 2011. I had accused my wife of walking too heavily and shaking the trailer (probably not a smart move), but when the 9 pound dog of ours caused the same shaking and vibrations, I knew I had to do something. After much research and many conversations with other Rver's, I made the decision to try these. The order came very well packaged and with the best set of installation instructions I think I have ever seen. It is very obvious these instructions were written in the USA and by the person with intimate knowledge on how everything works. All parts are heavy duty and everything is powder coated for long lasting durability. Also included were every conceivable part, bracket, nut and bolt for a variety of frame types. I took my time reading the instructions and studying the photos provided and everything went together without any issues whatsoever. The total installation time was about 2-1/2 hours. If I had to install another one, I think I could do it in an hour easily. The beauty of this product is once installed, it never needs to be removed and set up and take down only takes seconds! The best part about this is that it works! It removes about 95% of all movement once locked. Would I buy this again? Yes! In a heart beat. This is a very well designed and manufactured product using the best quality materials and MADE IN AMERICA. In case you are wondering, NO, I do not know the seller, nor am I related to him. I am simply a satisfied customer who really appreciates value.

I have a light weight toy hauler with a channel iron frame, after a quick call to Paul, I received the additional brackets that are needed to adapt to the frame and he was willing to face time with me to discuss the setup I had. Based on his feedback and recommendation, I upgraded my jacks from BAL "C" to standard scissor jacks.What a difference!!! After the install was complete, it removed 90+% of the movement in the back end of the trailer. I would give this product and Paul a GOLD STAR for an outstanding product and service.